Facing difficulty in getting started with Ubuntu image

[nsisodiya]

My Wifi is not working, I am using original Wifi module from Pine. I am also using original charge from Pine.
Here are my logs

ubuntu@pine64:~$ dmesg | grep wlan
[ 8.933130] sunxi-wlan wlan.27: wlan_busnum (1)
[ 8.938176] sunxi-wlan wlan.27: Missing wlan_power.
[ 8.943618] sunxi-wlan wlan.27: wlan_power_name ((null))
[ 8.949535] sunxi-wlan wlan.27: io_regulator_name (vcc-wifi-io)
[ 8.956150] sunxi-wlan wlan.27: wlan_regon gpio=354 mul-sel=1 pull=-1 drv_level=-1 data=0
[ 8.965684] sunxi-wlan wlan.27: wlan_hostwake gpio=355 mul-sel=6 pull=-1 drv_level=-1 data=0
[ 8.975497] sunxi-wlan wlan.27: clk not config
[ 13.730099] sunxi-wlan wlan.27: bus_index: 1
[ 13.745621] sunxi-wlan wlan.27: check wlan io_regulator voltage: 1800000
[ 14.193745] RTL871X: rtw_ndev_init(wlan0)
[ 14.207622] RTL871X: rtw_ndev_init(wlan1)


ubuntu@pine64:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 36:d5:2b:db:21:7b
inet addr:192.168.1.203 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::34d5:2bff:fedb:217b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:512 errors:0 dropped:0 overruns:0 frame:0
TX packets:332 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:44625 (44.6 KB) TX bytes:43405 (43.4 KB)
Interrupt:114

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:80 errors:0 dropped:0 overruns:0 frame:0
TX packets:80 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:5920 (5.9 KB) TX bytes:5920 (5.9 KB)


Detailed logs available at - https://gist.github.com/nsisodiya/925b80...9ae26b9ee4