12-26-2016, 10:44 PM
(11-30-2016, 02:23 PM)martinayotte Wrote: You don't need to do modprobe, it should comes automatically.
Check you DTS again, use "gpios = <0x30 0x2 0x8 0x0 0x0 0x0 0x0>;", recompile the DTB, reboot, and recheck.
Otherwise, it must be a wiring problem.
I believe that gpio PC8 as in the DTS is pin 12 on the PI bus. Try connecting the data line there instead of to pin 7.
