I bought new HDMI to DVI-D cable and tried but still no output to monitor (Samsung SyncMaster 920BM)
I have tried my old Raspberry Pi A+ as well with the same cable and monitor and it was working properly.
What's wrong with my pine64? Anyone does have 'DVI-D plug' monitor connected directly to pine64 by HDMI cable or reduction ?
Is there something wrong with the Linux config?
Here is log
debian@pine64:~$ dmesg | grep -i "disp"
[ 0.000000] Kernel command line: console=tty0 console=ttyS0,115200n8 no_console_suspend disp.screen0_output_mode=720p60 earlycon=uart,mmio32,0x01c28000 mac_addr=36:c9:e3:f1:b8:05 root=/dev/mmcblk0p2 ro rootwait
[ 7.525863] [DISP]disp_module_init
[ 7.526275] [DISP] disp_boot_para_parse,line:301:of_property_read disp.boot_disp fail
[ 7.526299] [DISP] boot_disp:0x0
[ 7.526874] [DISP] disp_sys_script_get_item,line:193:of_find_compatible_node allwinner,sunxi-lcd1 fail
[ 7.527033] [DISP] disp_sys_script_get_item,line:193:of_find_compatible_node allwinner,sunxi-lcd1 fail
[ 7.527191] [DISP] disp_sys_script_get_item,line:193:of_find_compatible_node allwinner,sunxi-lcd1 fail
[ 7.528284] [DISP] disp_boot_para_parse,line:301:of_property_read disp.fb_base fail
[ 7.528307] [DISP] fb_base:0x0
[ 7.593930] [DISP]disp_module_init finish
[ 10.828771] [DISP] disp_boot_para_parse,line:301:of_property_read disp.boot_disp fail
[ 10.843032] [DISP] boot_disp:0x0
[ 11.577377] [DISP] disp_device_attached_and_enable,line:159:attched ok, mgr0<-->device1, type=4, mode=10
[ 12.052308] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 12.067744] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 12.790324] systemd[1]: Starting Initialize Sunxi disp2 HDMI output mode...
[ 13.427482] systemd[1]: Started Initialize Sunxi disp2 HDMI output mode.
[ 18.901255] [DISP] disp_ioctl,line:1558:para err in disp_ioctl, cmd = 0x0,screen id = 65536
Please could you try this $dmesg | grep -i "disp" on you board and share result?
I have tried my old Raspberry Pi A+ as well with the same cable and monitor and it was working properly.
What's wrong with my pine64? Anyone does have 'DVI-D plug' monitor connected directly to pine64 by HDMI cable or reduction ?
Is there something wrong with the Linux config?
Here is log
debian@pine64:~$ dmesg | grep -i "disp"
[ 0.000000] Kernel command line: console=tty0 console=ttyS0,115200n8 no_console_suspend disp.screen0_output_mode=720p60 earlycon=uart,mmio32,0x01c28000 mac_addr=36:c9:e3:f1:b8:05 root=/dev/mmcblk0p2 ro rootwait
[ 7.525863] [DISP]disp_module_init
[ 7.526275] [DISP] disp_boot_para_parse,line:301:of_property_read disp.boot_disp fail
[ 7.526299] [DISP] boot_disp:0x0
[ 7.526874] [DISP] disp_sys_script_get_item,line:193:of_find_compatible_node allwinner,sunxi-lcd1 fail
[ 7.527033] [DISP] disp_sys_script_get_item,line:193:of_find_compatible_node allwinner,sunxi-lcd1 fail
[ 7.527191] [DISP] disp_sys_script_get_item,line:193:of_find_compatible_node allwinner,sunxi-lcd1 fail
[ 7.528284] [DISP] disp_boot_para_parse,line:301:of_property_read disp.fb_base fail
[ 7.528307] [DISP] fb_base:0x0
[ 7.593930] [DISP]disp_module_init finish
[ 10.828771] [DISP] disp_boot_para_parse,line:301:of_property_read disp.boot_disp fail
[ 10.843032] [DISP] boot_disp:0x0
[ 11.577377] [DISP] disp_device_attached_and_enable,line:159:attched ok, mgr0<-->device1, type=4, mode=10
[ 12.052308] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 12.067744] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 12.790324] systemd[1]: Starting Initialize Sunxi disp2 HDMI output mode...
[ 13.427482] systemd[1]: Started Initialize Sunxi disp2 HDMI output mode.
[ 18.901255] [DISP] disp_ioctl,line:1558:para err in disp_ioctl, cmd = 0x0,screen id = 65536
Please could you try this $dmesg | grep -i "disp" on you board and share result?
