Ethernet Slow Download

[androsch]

They do not affect what you correctly state has to be a hardware issue. I saw the post about how a specific chip was sourced from another location to try to get the orders out, but I also saw the one where someone was able to identify they had two boards with the SAME sourced chip and one worked and the other didn't. 

It seems this may be a manufacturing issue at this point that's triggered by something in the environment. Someone else sent in their board to longsleep and it worked fine in that environment.

I'm the one who sent his board to longsleep and it was fine there, but i'm still checking out with him, whether this was a iperf vs. iperf3 issue. My board reports  now also in my environment with iperf at about 300 mbits, thats similar to longsleep, but iperf3 only shows about 2-20 mbits, so this is still bad and the board is very laggy on GbE mode.
Will have my board checked deeper by tkaiser and we will report back in this forum also, even when he left resp. was forced to leave.

Edit (09/05): Got reply from longsleep, he also used iperf3 and iperf for testing, both worked fine, so really interested in tkaisers tests in the next week with my board....

Gesendet von meinem XT1032 mit Tapatalk

I have deep interest on the GbE finding.

Some results from tkaiser in the armbian forum with my board:

Armbian running on Pine

Maybe there are some guys also here in pine forum able to check some of the figures and suggestions he made?

Will at least have a look for an external power unit via Euler bus asap....