08-14-2016, 02:35 PM
Wolfenstein, I am so pleased to see you working on this.
... this is a very good step towards porting pigpio from Raspberry PI over to PineA64. Also, the more you understand about the RPi.GPIO-PinA64 source, the better we'll be positioned to implement a working i2S SPI i2c, and soft PWM.
Keep at it... I will also look at what you are proposing this next week--- keep working on it !
As long as we're sharing failures, i opened up the device-tree-compiler dtc and removed all references to spwm PL10 to see if by disabling that in the dtb we could reclaim pin(7) GPIO04. No luck so far... i removed the references and recompiled the dtb (with appropriate renaming) but there is a driver in there that I need to disable too... so I still don't have GPII04 working yet...
Stay in touch on this thread. tnx
... this is a very good step towards porting pigpio from Raspberry PI over to PineA64. Also, the more you understand about the RPi.GPIO-PinA64 source, the better we'll be positioned to implement a working i2S SPI i2c, and soft PWM.
Keep at it... I will also look at what you are proposing this next week--- keep working on it !
As long as we're sharing failures, i opened up the device-tree-compiler dtc and removed all references to spwm PL10 to see if by disabling that in the dtb we could reclaim pin(7) GPIO04. No luck so far... i removed the references and recompiled the dtb (with appropriate renaming) but there is a driver in there that I need to disable too... so I still don't have GPII04 working yet...
Stay in touch on this thread. tnx
marcushh777 
please join us for a chat @ irc.pine64.xyz:6667 or ssl irc.pine64.xyz:6697
( I regret that I am not able to respond to personal messages; let's meet on irc! )
please join us for a chat @ irc.pine64.xyz:6667 or ssl irc.pine64.xyz:6697
( I regret that I am not able to respond to personal messages; let's meet on irc! )
