CR2032 Battery holder - sanity check
#8
(07-23-2016, 05:33 PM)DonFL Wrote:
(07-23-2016, 05:25 PM)@lex Wrote: I mean two CR2032 (3v), the left coin (near the cable) (+) facing up, the second CR2032 (3v)  (-) facing up.

That puts them in series, giving you 6V rather than 3 as we are confident is correct. If you look at the scehmatic, there doesn't appear to be any on-board regulation for the RTC, so you're feeding that pin on the PMIC with 6V, spec appears to be 3V max.

I would tend to agree with xalius that the holder is mis-marked.

I mesured at the conector, it is 2.85v, so it is not feeding with 6v.
  Reply


Messages In This Thread
CR2032 Battery holder - sanity check - by xalius - 07-22-2016, 04:30 PM
RE: CR2032 Battery holder - sanity check - by @lex - 07-23-2016, 05:35 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
Rainbow Lithium battery temperature readout? GregH 0 2,465 03-12-2020, 12:05 AM
Last Post: GregH
  Lithium 3.7 Volt Battery Ron Piggott 49 86,358 07-15-2017, 03:56 PM
Last Post: tllim
  Battery level measurement? HugoRabson 2 5,302 03-08-2017, 06:30 PM
Last Post: pfeerick
  Travelling with the Pine64 (and Lipo battery) psychedup 2 5,970 02-17-2017, 08:18 PM
Last Post: tllim
  Battery temp pin? SvdSinner 1 4,879 12-13-2016, 11:35 AM
Last Post: MarkHaysHarris777
  battery power in android UnixOutlaw 40 69,910 09-25-2016, 07:54 PM
Last Post: tllim
  RTC Backup Battery - CR sbentjies 6 12,298 07-15-2016, 06:35 PM
Last Post: jwouellette
  Battery Datasheet xalius 0 3,071 06-20-2016, 07:38 PM
Last Post: xalius
  Lithium 'salt and battery UnixOutlaw 0 2,987 05-29-2016, 09:32 PM
Last Post: UnixOutlaw
  Minor note about the RTC battery MichaelMeissner 12 23,372 02-18-2016, 05:17 AM
Last Post: German

Forum Jump:


Users browsing this thread: 5 Guest(s)