07-04-2016, 01:24 PM
Repeated results with fresh set of Cat5e and Cat6 cables.
When running server on laptop with gigabit Ethernet:
When server is running on Pine64 and on laptop sequentially:
I even tried using more powerful power supply 3.5A, but that also does not make a difference.
I also tried running Debian Jessie image from another thread and the results are slight worse.
I even found this article on CNX-Software where reviewer has faced similar issues, so I know I am not alone with this.
When running server on laptop with gigabit Ethernet:
Code:
root@kali:~# iperf -s
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 85.3 KByte (default)
------------------------------------------------------------
[ 4] local 192.168.254.250 port 5001 connected with 192.168.254.2 port 52691
------------------------------------------------------------
Client connecting to 192.168.254.2, TCP port 5001
TCP window size: 254 KByte (default)
------------------------------------------------------------
[ 6] local 192.168.254.250 port 38190 connected with 192.168.254.2 port 5001
[ ID] Interval Transfer Bandwidth
[ 6] 0.0-30.0 sec 3.21 GBytes 920 Mbits/sec
[ 4] 0.0-30.1 sec 3.00 MBytes 837 Kbits/sec
[ 5] local 192.168.254.250 port 5001 connected with 192.168.254.2 port 52692
[ 5] 0.0-30.0 sec 403 MBytes 113 Mbits/sec
When server is running on Pine64 and on laptop sequentially:
Code:
root@kali:~# iperf -c 192.168.254.2
------------------------------------------------------------
Client connecting to 192.168.254.2, TCP port 5001
TCP window size: 43.8 KByte (default)
------------------------------------------------------------
[ 3] local 192.168.254.250 port 38192 connected with 192.168.254.2 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-10.0 sec 1.07 GBytes 918 Mbits/sec
Code:
iperf -s
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 85.3 KByte (default)
------------------------------------------------------------
[ 4] local 192.168.254.250 port 5001 connected with 192.168.254.2 port 52694
[ ID] Interval Transfer Bandwidth
[ 4] 0.0-30.0 sec 557 MBytes 156 Mbits/sec
I even tried using more powerful power supply 3.5A, but that also does not make a difference.
I also tried running Debian Jessie image from another thread and the results are slight worse.
I even found this article on CNX-Software where reviewer has faced similar issues, so I know I am not alone with this.
Pine64+ 2GB