07-01-2016, 04:13 PM
Could someone please test iperf -t 60 -c <remoteip> -d since I am getting very bad results, inbound speed is ok, but outbound is awful?
Tried it even with autoneg turned off and forced eth0 to 100Mbit (since my model is 2GB with 1Gbit ethernet) and the results are:
iperf -t 60 -c 192.168.254.1 -d
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 85.3 KByte (default)
------------------------------------------------------------
------------------------------------------------------------
Client connecting to 192.168.254.1, TCP port 5001
TCP window size: 45.1 KByte (default)
------------------------------------------------------------
[ 5] local 192.168.254.2 port 38468 connected with 192.168.254.1 port 5001
[ 4] local 192.168.254.2 port 5001 connected with 192.168.254.1 port 36066
[ ID] Interval Transfer Bandwidth
[ 5] 0.0-60.0 sec 442 MBytes 61.8 Mbits/sec
[ 4] 0.0-63.7 sec 7.75 MBytes 1.02 Mbits/sec
Tried it even with autoneg turned off and forced eth0 to 100Mbit (since my model is 2GB with 1Gbit ethernet) and the results are:
iperf -t 60 -c 192.168.254.1 -d
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 85.3 KByte (default)
------------------------------------------------------------
------------------------------------------------------------
Client connecting to 192.168.254.1, TCP port 5001
TCP window size: 45.1 KByte (default)
------------------------------------------------------------
[ 5] local 192.168.254.2 port 38468 connected with 192.168.254.1 port 5001
[ 4] local 192.168.254.2 port 5001 connected with 192.168.254.1 port 36066
[ ID] Interval Transfer Bandwidth
[ 5] 0.0-60.0 sec 442 MBytes 61.8 Mbits/sec
[ 4] 0.0-63.7 sec 7.75 MBytes 1.02 Mbits/sec