06-13-2025, 03:03 PM
Two new cases have been added to SBC Case Builder that may interest the Pine64 community.
The first is a NAS case with a tool-less panel design that can be produced with CNC cutting machines or 3D printed. Both 2.5" and 3.5" drives are supported but 2.5" drives use a 3.5" to 2.5" adapter. If you don't have adapters one can be printed using sbccb_accessory_tool.scad
Nas Case Features
- Top or bottom rear SBC position
- Wide SBC support
- User adjustable xyz case dimensions
- Mixed panel thickness
- Up to six 3.5” hard drives
- Drive positioning and spacing GUI control
- Forward or rear facing drive orientation
- Front, top and bottom vent cover patterns
- Rear fan(s) positioning and spacing GUI control
- Part sections for CNC production, DXF or SVG
The Rack case has many options and can produce a variety of rack bays in either 10" or 19" width. There are brackets available to make a table top stand for those who currently don't have a stationary rack. Shouldered washers that use 3mm hardware can also be printed for use with the table top stand. Both are available in sbccb_accessory_tool.scad.
Rack Case Features
- 19” and 10” rack support
- 1U-2U case height
- 6 bays (19”) or 3 bays (10”)
- 4 bay types – fixed, open, removable, vent
- Multi heterogeneous SBC with individual location and rotation
- Removable SBC support
- Divider wall individual enable
- Bays can be combined for larger bays
- Rear fan per bay with individual enable
- Top and bottom vent covers
- Bay cable management – conduit, single or double split sleeve grommet
- Accessory subsystem support
The rack cases are divided into approximately 150mm wide parts for printing and use M2 hardware for assembly.
The first is a NAS case with a tool-less panel design that can be produced with CNC cutting machines or 3D printed. Both 2.5" and 3.5" drives are supported but 2.5" drives use a 3.5" to 2.5" adapter. If you don't have adapters one can be printed using sbccb_accessory_tool.scad
Nas Case Features
- Top or bottom rear SBC position
- Wide SBC support
- User adjustable xyz case dimensions
- Mixed panel thickness
- Up to six 3.5” hard drives
- Drive positioning and spacing GUI control
- Forward or rear facing drive orientation
- Front, top and bottom vent cover patterns
- Rear fan(s) positioning and spacing GUI control
- Part sections for CNC production, DXF or SVG
The Rack case has many options and can produce a variety of rack bays in either 10" or 19" width. There are brackets available to make a table top stand for those who currently don't have a stationary rack. Shouldered washers that use 3mm hardware can also be printed for use with the table top stand. Both are available in sbccb_accessory_tool.scad.
Rack Case Features
- 19” and 10” rack support
- 1U-2U case height
- 6 bays (19”) or 3 bays (10”)
- 4 bay types – fixed, open, removable, vent
- Multi heterogeneous SBC with individual location and rotation
- Removable SBC support
- Divider wall individual enable
- Bays can be combined for larger bays
- Rear fan per bay with individual enable
- Top and bottom vent covers
- Bay cable management – conduit, single or double split sleeve grommet
- Accessory subsystem support
The rack cases are divided into approximately 150mm wide parts for printing and use M2 hardware for assembly.
