(05-05-2024, 11:52 PM)zetabeta Wrote: is it bad behaving suspend (sleep)?!
i noticed, that phosh does not immediately show suspend option. maybe something needs to be started in a background when suspend option is shown in power submenu.
you didn't tell your o.s.! mobian (and debian) trixie has t64 tansition going on in trixie, which causes headaches.
did you have automatic updates? which is bad idea for beta software.
tow-boot does not have recovery mode, at least not same as in android world. rough options are, normal boot, sdcard boot, and builtin usb jumpdrive mode.
It looks to me like the phone is alive. This is what I get booting normally:
Code:
U-Boot SPL 2020.07-rc4-11.2 (Jan 31 2021 - 14:19:48 +0000)
DRAM: 3072 MiB
Trying to boot from MMC2
NOTICE: BL31: v2.3(debug):
NOTICE: BL31: Built : 14:19:48, Jan 31 2021
NOTICE: BL31: Detected Allwinner A64/H64/R18 SoC (1689)
NOTICE: BL31: Found U-Boot DTB at 0x4064908, model: Pine64 PinePhone (1.2)
INFO: ARM GICv2 driver initialized
INFO: Configuring SPC Controller
INFO: PMIC: Probing AXP803 on RSB
INFO: PMIC: dcdc1 voltage: 3.300V
INFO: PMIC: dcdc5 voltage: 1.200V
INFO: PMIC: dcdc6 voltage: 1.100V
INFO: PMIC: dldo1 voltage: 3.300V
INFO: PMIC: dldo2 voltage: 1.800V
INFO: PMIC: dldo3 voltage: 2.800V
INFO: BL31: Platform setup done
INFO: BL31: Initializing runtime services
INFO: BL31: cortex_a53: CPU workaround for 843419 was applied
INFO: BL31: cortex_a53: CPU workaround for 855873 was applied
NOTICE: PSCI: System suspend is available via SCPI
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x4a000000
INFO: SPSR = 0x3c9
U-Boot 2020.07-rc4-11.2 (Jan 31 2021 - 14:19:48 +0000) Manjaro Linux ARM
CPU: Allwinner A64 (SUN50I)
Model: Pine64 PinePhone (1.2)
DRAM: 3 GiB
MMC: Device 'mmc@1c11000': seq 1 is in use by 'mmc@1c10000'
mmc@1c0f000: 0, mmc@1c10000: 2, mmc@1c11000: 1
Loading Environment from FAT... *** Warning - bad CRC, using default environment
In: serial@1c28000
Out: serial@1c28000
Err: serial@1c28000
starting USB...
No working controllers found
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc1(part 0) is current device
Scanning mmc 1:1...
Found U-Boot script /boot.scr
975 bytes read in 1 ms (952.1 KiB/s)
## Executing script at 4fc00000
gpio: pin 98 (gpio 98) value is 1
gpio: pin 114 (gpio 114) value is 1
19042312 bytes read in 816 ms (22.3 MiB/s)
gpio: pin 98 (gpio 98) value is 0
51342 bytes read in 5 ms (9.8 MiB/s)
7172119 bytes read in 308 ms (22.2 MiB/s)
gpio: pin 115 (gpio 115) value is 1
## Flattened Device Tree blob at 4fa00000
Booting using the fdt blob at 0x4fa00000
Loading Ramdisk to 49928000, end 49fff017 ... OK
Loading Device Tree to 0000000049918000, end 000000004992788d ... OK
Starting kernel ...
[ 0.654863] SMCCC: SOC_ID: ARCH_SOC_ID(0) returned error: ffffffffffffffff
[ 3.328194] i2c i2c-1: mv64xxx: I2C bus locked, block: 1, time_left: 0
[ 3.334783] Goodix-TS 1-005d: i2c test failed attempt 1: -110
[ 5.408192] i2c i2c-1: mv64xxx: I2C bus locked, block: 1, time_left: 0
[ 5.414744] Goodix-TS 1-005d: i2c test failed attempt 2: -110
[ 5.448189] Goodix-TS 1-005d: I2C communication failure: -110
Starting version 247.3-1-arch
ROOT_MNJRO: recovering journal
ROOT_MNJRO: clean, 173247/1880480 files, 1344654/7515099 blocks
[ 9.003700] iio iio:device1: failed to read Who-Am-I register.
[ 11.067969] i2c i2c-1: mv64xxx: I2C bus locked, block: 1, time_left: 0
[ 11.074678] anx7688 1-0028: tcpc i2c read failed at 0x0 (-110)
[ 13.120226] i2c i2c-1: mv64xxx: I2C bus locked, block: 1, time_left: 0
[ 13.126902] anx7688 1-0028: tcpc i2c read failed at 0x1 (-110)
Manjaro Linux 5.11.3-1-MANJARO-ARM (ttyS0)
plasma-mobile login:And with the SD inserted
Code:
DRAM: 3072 MiB
Trying to boot from MMC1
NOTICE: BL31: v2.2(release):v2.2-904-gf9ea3a629
NOTICE: BL31: Built : 15:32:12, Apr 9 2020
NOTICE: BL31: Detected Allwinner A64/H64/R18 SoC (1689)
NOTICE: BL31: Found U-Boot DTB at 0x4064410, model: PinePhone
NOTICE: PSCI: System suspend is unavailable
U-Boot 2020.07 (Nov 08 2020 - 00:15:12 +0100)
DRAM: 3 GiB
MMC: Device 'mmc@1c11000': seq 1 is in use by 'mmc@1c10000'
mmc@1c0f000: 0, mmc@1c10000: 2, mmc@1c11000: 1
Loading Environment from FAT... *** Warning - bad CRC, using default environment
starting USB...
No working controllers found
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr
653 bytes read in 2 ms (318.4 KiB/s)
## Executing script at 4fc00000
gpio: pin 114 (gpio 114) value is 1
4275261 bytes read in 188 ms (21.7 MiB/s)
Uncompressed size: 10170376 = 0x9B3008
36162 bytes read in 3 ms (11.5 MiB/s)
1078500 bytes read in 49 ms (21 MiB/s)
## Flattened Device Tree blob at 4fa00000
Booting using the fdt blob at 0x4fa00000
Loading Ramdisk to 49ef8000, end 49fff4e4 ... OK
Loading Device Tree to 0000000049eec000, end 0000000049ef7d41 ... OK
Starting kernel ...
/ #But nothing on the screen but the backlight. Clearly there's something up but I'm not a hardware guy,
