Need some help.
I downloaded the image, with {code:bash}xzcat xenial-pine64-bspkernel-20160507-1.img.xz|sudo dd of=/dev/disk2s1 bs=1m{code} to flush to the sd card (32G) from my Mac. I have a raspberry pi microUSB power source (2Amp), and a HDMI cable. Pretty sure HDMI cable and SD card are working, as I basically pulled them off from my raspberry Pi.
And I think I finished the write, I have the output of:
0+59201 records in
0+59201 records out
3879731200 bytes transferred in 2984.895890 secs (1299788 bytes/sec)
Nothing happened except the red light was on after the power source was plugged in. No video output. Any ideas?
THANKS!
I downloaded the image, with {code:bash}xzcat xenial-pine64-bspkernel-20160507-1.img.xz|sudo dd of=/dev/disk2s1 bs=1m{code} to flush to the sd card (32G) from my Mac. I have a raspberry pi microUSB power source (2Amp), and a HDMI cable. Pretty sure HDMI cable and SD card are working, as I basically pulled them off from my raspberry Pi.
And I think I finished the write, I have the output of:
0+59201 records in
0+59201 records out
3879731200 bytes transferred in 2984.895890 secs (1299788 bytes/sec)
Nothing happened except the red light was on after the power source was plugged in. No video output. Any ideas?
THANKS!