Rock64 Debian 11 (Bullseye) install problem
I have a Rock64-2GB (V3.0). Following these instructions (https://wiki.pine64.org/wiki/ROCK64_Soft...ses#Debian), I downloaded and burned a Debian 11 (Bullseye) installer to a microSd.
I don't have eMMC, so I installed a blank microSD into a USB3 adapter, and with the installer in the microSD slot and the target in the USB3 slot, I ran the installer, selecting sda as the target.
It took a while, but when it finished and started to reboot, I powered off, removed the installer, and put the newly installed microSD in the microSD slot.
It didn't boot. I even tried using an HDMI head, but to no avail.
To temporarily continue with my work, I am running Armian (Bullseye), but that has it's own issues and I need to get the stock Debian working.
Can anyone offer help or suggestions?
I don't have eMMC, so I installed a blank microSD into a USB3 adapter, and with the installer in the microSD slot and the target in the USB3 slot, I ran the installer, selecting sda as the target.
It took a while, but when it finished and started to reboot, I powered off, removed the installer, and put the newly installed microSD in the microSD slot.
It didn't boot. I even tried using an HDMI head, but to no avail.
To temporarily continue with my work, I am running Armian (Bullseye), but that has it's own issues and I need to get the stock Debian working.
Can anyone offer help or suggestions?