Pine 64 benchmarks

[g_t_j]

http://www.aliexpress.com/item/FREE-Ship...50220.html
http://www.aliexpress.com/item/2-pcs-lot...87879.html

this is reasonable alternative if you can wait few days for shipping.
If you can wait a bit longer I would wait for heatsink that @tllim is working on. A large heatsink covering the SoC, memory and PMIC (with or without a larger fan) would be the best solution.

Here are the heat sink samples photos, Aluminum with copper plated. We will need to characterize the heat sink and will takes few week.

TL Lim, I was hoping you have any updates on the heat sink you were working on?

Also, 2 of my boards are defective apparently as I can't connect to the internet with them. Which is the procedure I'll have to follow?

The heatsink samples already build and tested. I have ship some out for try out and wait for respond.

How many boards that you have? Surprise to know that 2 of your boards are defective?

2 out of 4 boards have problem with Internet. 
I tested them under the same conditions (same cables Psu's, same sd card etc). 

2 Of them perform just fine while on  the other 2 Internet is extremely slow or non existent. 

I would be keen on trying the heat sink.