01-28-2022, 10:11 AM
I’d go to my local hardware store, get a lock washer & washer with a bit longer screw, tighten it down and if it didn’t sit level, change the rest of them; problem solved.
You mentioned twice that a flat-head screw pulled out from the back case, but aren’t the original screws phillips?
https://wiki.pine64.org/wiki/File:Pinebo...screws.jpg
The Wiki states that you need a PH0 phillips bit to open the back cover.
Seems like you bought a used PBP that someone worked on. I haven’t used a flat-head screw for anything in 4 decades.
You mentioned twice that a flat-head screw pulled out from the back case, but aren’t the original screws phillips?
https://wiki.pine64.org/wiki/File:Pinebo...screws.jpg
The Wiki states that you need a PH0 phillips bit to open the back cover.
Seems like you bought a used PBP that someone worked on. I haven’t used a flat-head screw for anything in 4 decades.
PinePhone, Pinebook Pro & PineTab2 owner.