05-26-2016, 09:21 AM
Hi,
I got the backed pine64 512, pretty exited tried to boot using the Debian image provided but no success with all the attempts
1. Used 5V 2amp adapator with cable the Red led goes of after some time
2. Changed cables as per the support from luke and bought 24 AWG cable the board keeps rebooting for couple of times and shuts down completely
3. The power management IC heats up like its going to blow up, but good it has the functionality of shutting down crossing certain temperature ..
4. Strongly feel there is an hardware issue with the 512 what I have received and nothing to do with the power when it is able to boot up Pi3 with the same adaptor
5. tried with 65 and 101 images, no results even after multiple booting
6. no other peripherals connected, still no success
7. Connected only ethernet, but still no success with same results
8. Have checked the serial output during boot it stops at cooling the cpu and shuts down with RED LED going off
can somebody suggest or help here to resolve the issue
I got the backed pine64 512, pretty exited tried to boot using the Debian image provided but no success with all the attempts
1. Used 5V 2amp adapator with cable the Red led goes of after some time
2. Changed cables as per the support from luke and bought 24 AWG cable the board keeps rebooting for couple of times and shuts down completely
3. The power management IC heats up like its going to blow up, but good it has the functionality of shutting down crossing certain temperature ..
4. Strongly feel there is an hardware issue with the 512 what I have received and nothing to do with the power when it is able to boot up Pi3 with the same adaptor
5. tried with 65 and 101 images, no results even after multiple booting
6. no other peripherals connected, still no success
7. Connected only ethernet, but still no success with same results
8. Have checked the serial output during boot it stops at cooling the cpu and shuts down with RED LED going off
can somebody suggest or help here to resolve the issue