PINE64   ›   ROCKPRO64   ›   RockPro64 Hardware and Accessories   ›   RockPro64 doesn't boot when PCIe to M.2 adapter is installed

RockPro64 doesn't boot when PCIe to M.2 adapter is installed
Cerberus
Pine Initiate
**
Joined: Nov 2021
Posts: 5

Reputation: 0
#1
11-25-2021, 10:35 PM
I see the green LED near the power plug and green LED on the adapter. After pressing the power button, I see some chromatic distortion on the display for about a second then nothing else. The white LED does not light up. After removing the adapter, I am able to boot up as expected. I am trying to boot from the SD card. My understanding is that the SD card would have a higher than NVMe for boot if I had flashed the SPI (to allow for NVMe booting), but I haven't flashed the SPI.
  Reply


Messages In This Thread
RockPro64 doesn't boot when PCIe to M.2 adapter is installed - by Cerberus - 11-25-2021, 10:35 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  ROCKPro64 Battery Power Supply hoarfrosty 12 4,154 04-01-2024, 10:24 PM
Last Post: nano2
  No audio on HDMI after u-boot upgrade xlx 2 2,472 11-28-2023, 01:03 PM
Last Post: wdt
  Powering on the Rockpro64 JPT223 1 1,291 09-24-2023, 12:23 PM
Last Post: hoarfrosty
  RP64 Won't Boot After Power Down ColPanic_ 10 9,806 06-27-2023, 07:31 AM
Last Post: dkebler
  Compatible PCIe Sata Controller spacebricker 1 1,949 02-06-2023, 10:03 AM
Last Post: diizzy
  ROCKPro64 with 16 ports SATA controller ZeblodS 19 29,106 12-18-2022, 06:25 PM
Last Post: heyghoge
  Using RPI hat on RockPro64? misterc 0 1,122 12-16-2022, 02:05 PM
Last Post: misterc
  PCIe bifurcation support (on RK3399) Arn 1 1,759 11-28-2022, 05:12 PM
Last Post: tllim
  GPIO on the RockPro64 - all pins high? colinmarc 2 2,184 11-18-2022, 10:20 AM
Last Post: colinmarc
  ROCKPro64 DOA ajtravis 8 8,126 11-08-2022, 03:40 AM
Last Post: ajtravis

Forum Jump:


Users browsing this thread: 2 Guest(s)