PBP Can't Boot Up
#1
Dear Pine64 Community,

I really really love PBP. But, it's dead, unable to boot up.
I'm not sure what I did that caused PBP dead.

I have done all Wiki and steps to reset, bypass the power and reset again. None of this worked.
Please kindly advise. Thanks.
  Reply
#2
(04-17-2022, 09:23 PM)iscmob Wrote: Dear Pine64 Community,

I really really love PBP. But, it's dead, unable to boot up.
I'm not sure what I did that caused PBP dead.

I have done all Wiki and steps to reset, bypass the power and reset again. None of this worked.
Please kindly advise. Thanks.

So I assume it did boot before and you haven't changed the installed OS.
Did you boot it after a long period of inactivity?
Did you let it charge for a full day?
  Reply
#3
(04-18-2022, 03:15 AM)jiyong Wrote:
(04-17-2022, 09:23 PM)iscmob Wrote: Dear Pine64 Community,

I really really love PBP. But, it's dead, unable to boot up.
I'm not sure what I did that caused PBP dead.

I have done all Wiki and steps to reset, bypass the power and reset again. None of this worked.
Please kindly advise. Thanks.

So I assume it did boot before and you haven't changed the installed OS.
Did you boot it after a long period of inactivity?
Did you let it charge for a full day?

I have PBP for a year plus, working fine until I tried to change the software (fr Debian to others).
It had intermittent boot problem (ie sometimes it could boot up and sometimes it couldn't). Then I did the reset according to our Wiki page.
And the problem persisted. Then I remove the ribbon cable to the small MB and connect the Power Bridge Connector. This didn't work.
Thus, I had done all available steps on our Wiki to jump start PBP, still PBP cannot be revived.
  Reply
#4
(04-18-2022, 07:22 PM)iscmob Wrote:
(04-18-2022, 03:15 AM)jiyong Wrote:
(04-17-2022, 09:23 PM)iscmob Wrote: Dear Pine64 Community,

I really really love PBP. But, it's dead, unable to boot up.
I'm not sure what I did that caused PBP dead.

I have done all Wiki and steps to reset, bypass the power and reset again. None of this worked.
Please kindly advise. Thanks.

So I assume it did boot before and you haven't changed the installed OS.
Did you boot it after a long period of inactivity?
Did you let it charge for a full day?

I have PBP for a year plus, working fine until I tried to change the software (fr Debian to others).
It had intermittent boot problem (ie sometimes it could boot up and sometimes it couldn't). Then I did the reset according to our Wiki page.
And the problem persisted. Then I remove the ribbon cable to the small MB and connect the Power Bridge Connector. This didn't work.
Thus, I had done all available steps on our Wiki to jump start PBP, still PBP cannot be revived.

Do you have a USB adapter for the eMMC?
Can you try to flash the original Debian image on the eMMC?
  Reply
#5
(04-19-2022, 07:18 AM)jiyong Wrote:
(04-18-2022, 07:22 PM)iscmob Wrote:
(04-18-2022, 03:15 AM)jiyong Wrote:
(04-17-2022, 09:23 PM)iscmob Wrote: Dear Pine64 Community,

I really really love PBP. But, it's dead, unable to boot up.
I'm not sure what I did that caused PBP dead.

I have done all Wiki and steps to reset, bypass the power and reset again. None of this worked.
Please kindly advise. Thanks.

So I assume it did boot before and you haven't changed the installed OS.
Did you boot it after a long period of inactivity?
Did you let it charge for a full day?

I have PBP for a year plus, working fine until I tried to change the software (fr Debian to others).
It had intermittent boot problem (ie sometimes it could boot up and sometimes it couldn't). Then I did the reset according to our Wiki page.
And the problem persisted. Then I remove the ribbon cable to the small MB and connect the Power Bridge Connector. This didn't work.
Thus, I had done all available steps on our Wiki to jump start PBP, still PBP cannot be revived.

Do you have a USB adapter for the eMMC?
Can you try to flash the original Debian image on the eMMC?

I do have a USB adapter and did reflash the eMMC. Still, it didn't solve the problem. 
Is there a way to disassemble the whole laptop and check each component,  aseemble it back?
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  how to make a bootable USB linux sine pinebook will not boot up River 12 320 11-29-2022, 05:41 AM
Last Post: KC9UDX
  U-boot Updates jaredoconnor 5 325 11-17-2022, 04:25 PM
Last Post: wdt
  1st boot chrisrook 5 786 11-15-2022, 02:51 PM
Last Post: igorp
  Cannot Boot From SD Card xp19375 4 397 11-12-2022, 11:26 AM
Last Post: KC9UDX
  Unable to boot from emmc after flashing it rfm83 3 313 11-08-2022, 10:59 PM
Last Post: rfm83
  Pinebook picky about which EMMC will boot flatulent_piney 8 532 11-05-2022, 06:03 PM
Last Post: ajtravis
  Need to re-write U-boot from Pinephone pro currently in mass rom mode wolverine1 1 260 10-30-2022, 10:09 AM
Last Post: wdt
Photo can not boot pinebook pro from recent production run justwantin 9 592 10-22-2022, 06:06 PM
Last Post: justwantin
  No boot after Manjaro flash PBcurry 14 1,325 10-03-2022, 08:33 PM
Last Post: wdt
  After Flashing eMMC, Will Not Boot Mossbot 5 575 09-28-2022, 06:22 PM
Last Post: wdt

Forum Jump:


Users browsing this thread: 1 Guest(s)