External storage problem for pine64

[Dani6102]

Hi there!
I have recently bought a pine64 and i am using it as a plex server with USB-stick as extra drive to not fill the sd card, unfortunately when i tried to connect a 1tb 2,5 HDD from seagate it wasn't reading it's content, from searching online i found out that the usb2.0 do not provide enough power, and i was now wondering if they could support an SSD or if i need to buy an usb hub.

do you have any suggestion about my problem?

thanks!

[tophneal]

a 2.5" SSD should only draw about 5v, which is the max USB2 can supply, but if you're able you could grab an nvme+usb case/adapter and it would likely only be pulling about 3.3v, with some wiggle room for usage peaks. either form of SSD or a powered usb hub should work for your use case.

[Dani6102]

a 2.5" SSD should only draw about 5v, which is the max USB2 can supply, but if you're able you could grab an nvme+usb case/adapter and it would likely only be pulling about 3.3v, with some wiggle room for usage peaks. either form of SSD or a powered usb hub should work for your use case.

thanks for the response, i tried plugging in a 120gb ssd but it is not recognized as sd*1 so i think i need to go with an usbhub or an nvme, do you or anyone who will read this post have any suggestion for a cheap nvme+adapter combo or a decent hub?

[tophneal]

i use the ElecGear NV-2242A nvme enclosure on the daily. it's solidly built and the magnetic cap is extremely convenient. i don't recall which nvme i have in it, but i think it's either a 2242 Sabrent 512GB Rocket or a 2242 MyDigitalSSD Super boot 2. as far as a hub, any that handles usb2 and has a wall wart for additional power should work just fine.

[gulshan212]

Well, I will recommend you to choose the one of the best option i.e. consideration of SSD which is extremely fast and less power consuming.
Thanks