[SOLVED] Boot from SD works, no boot with eMMC

[gkkpch]

[EDIT] It seems I got my post mixed up, so from the beginning:

I try to get Volumio running an a SOPINE but only managed with an SD card.
I know that boot0 has to be swapped for boot0so and uboot with a new version with the sopine device tree.
For the SD card that seems ok, but eMMC won't boot.
Then I tried a community ubuntu image and get this:

Code:

HELLO! BOOT0 is starting! boot0 commit : 43e77041d17badbf8be959b8db97232c5e3a0a75 boot0 version : 4.0.0 set pll start set pll end rtc[0] value = 0x00000000 rtc[1] value = 0x00000000 rtc[2] value = 0x00000000 rtc[3] value = 0x00000000 rtc[4] value = 0x00000000 rtc[5] value = 0x00000000 DRAM driver version: V1.1 rsb_send_initseq: rsb clk 400Khz -> 3Mhz PMU: AXP81X ddr voltage = 1280 mv DRAM Type = 7 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3) DRAM clk = 552 MHz DRAM zq value: 003b3bdd DRAM dual rank full DQ gate training OK DRAM size = 2048 MB DRAM init ok dram size =2048 card boot number = 2, boot0 copy = 0 card no is 2 sdcard 2 line count 8 [mmc]: mmc driver ver 2015-05-08 20:06 [mmc]: Wrong media type 0x00000000 [mmc]: ***Try SD card 2*** [mmc]: mmc 2 cmd 8 timeout, err 00000100 [mmc]: mmc 2 cmd 8 err 00000100 [mmc]: mmc 2 send if cond failed [mmc]: mmc 2 cmd 55 timeout, err 00000100 [mmc]: mmc 2 cmd 55 err 00000100 [mmc]: mmc 2 send app cmd failed [mmc]: ***Try MMC card 2*** [mmc]: MMC 5.0 [mmc]: HSDDR52/DDR50 8 bit [mmc]: 50000000 Hz [mmc]: 14800 MB [mmc]: ***SD/MMC 2 init OK!!!*** sdcard 2 init ok The size of uboot is 000e8000. [mmc]: mmc 2 data timeout, err 00000080 [mmc]: mmc 2 cmd 18 err 00000080 [mmc]: mmc 2  read blcok failed [mmc]: mmc 2 block read failed Fail in reading uboot head. Ready to disable icache.

Testing with a Volumio image and eMMC makes a slight difference, it seems to initialise but still fails
This image one was built by me using longsleep's BSP:

Code:

boot0 version : 4.0.0 set pll start set pll end rtc[0] value = 0x00000000 rtc[1] value = 0x00000000 rtc[2] value = 0x00000000 rtc[3] value = 0x00000000 rtc[4] value = 0x00000000 rtc[5] value = 0x00000000 DRAM driver version: V1.1 rsb_send_initseq: rsb clk 400Khz -> 3Mhz PMU: AXP81X ddr voltage = 1280 mv DRAM Type = 7 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3) DRAM clk = 552 MHz DRAM zq value: 003b3bdd DRAM dual rank full DQ gate training OK DRAM size = 2048 MB DRAM init ok dram size =2048 card boot number = 2, boot0 copy = 0 card no is 2 sdcard 2 line count 8 [mmc]: mmc driver ver 2015-05-08 20:06 [mmc]: Wrong media type 0x00000000 [mmc]: ***Try SD card 2*** [mmc]: mmc 2 cmd 8 timeout, err 00000100 [mmc]: mmc 2 cmd 8 err 00000100 [mmc]: mmc 2 send if cond failed [mmc]: mmc 2 cmd 55 timeout, err 00000100 [mmc]: mmc 2 cmd 55 err 00000100 [mmc]: mmc 2 send app cmd failed [mmc]: ***Try MMC card 2*** [mmc]: MMC 5.0 [mmc]: HSDDR52/DDR50 8 bit [mmc]: 50000000 Hz [mmc]: 14800 MB [mmc]: ***SD/MMC 2 init OK!!!*** sdcard 2 init ok The size of uboot is 000e8000. [mmc]: mmc 2 data timeout, err 00000080 [mmc]: mmc 2 cmd 18 err 00000080 [mmc]: mmc 2  read blcok failed [mmc]: mmc 2 block read failed Fail in reading uboot head. Ready to disable icache.

Booting from SD gives me this:

Code:

HELLO! BOOT0 is starting! boot0 commit : 43e77041d17badbf8be959b8db97232c5e3a0a75 boot0 version : 4.0.0 set pll start set pll end rtc[0] value = 0x00000000 rtc[1] value = 0x00000000 rtc[2] value = 0x00000000 rtc[3] value = 0x00000000 rtc[4] value = 0x00000000 rtc[5] value = 0x00000000 DRAM driver version: V1.1 rsb_send_initseq: rsb clk 400Khz -> 3Mhz PMU: AXP81X ddr voltage = 1280 mv DRAM Type = 7 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3) DRAM clk = 552 MHz DRAM zq value: 003b3bdd DRAM dual rank full DQ gate training OK DRAM size = 2048 MB DRAM init ok dram size =2048 card boot number = 0, boot0 copy = 0 card no is 0 sdcard 0 line count 4 [mmc]: mmc driver ver 2015-05-08 20:06 [mmc]: sdc0 spd mode error, 2 [mmc]: Wrong media type 0x00000000 [mmc]: ***Try SD card 0*** [mmc]: HSSDR52/SDR25 4 bit [mmc]: 50000000 Hz [mmc]: 15193 MB [mmc]: ***SD/MMC 0 init OK!!!*** sdcard 0 init ok The size of uboot is 000ec000. sum=d2bdbe35 src_sum=d2bdbe35 Succeed in loading uboot from sdmmc flash. boot0: start load other image boot0: Loading BL3-1 Loading file 0 at address 0x40000000,size 0x00008400 success boot0: Loading scp Loading file 2 at address 0x00040000,size 0x00019c00 success set arisc reset to de-assert state Ready to disable icache. Jump to secend Boot. U-Boot 2014.07-g6f37e5c (Jun 27 2017 - 10:50:26) Allwinner Technology etc........

Anyone any idea??
-- Gé --

---

I forgot to add: I flash the eMMC using an adapter from Hardkernel, same one I successfully use for Rock64.
The eMMC is a Foresee 16GB module from the shop, tried a second one too, both work ok with rock64.

[gkkpch]

and the BSP version might be the problem. 

Ayufan has done a number of changes and backports concerning mmc since he forked, so before digging further I will switch to his version and report back here.

-- Gé --

[gkkpch]

Solved!

- Upgraded to Ayufan's 3.10.105-bsp-1.2+ kernel repo
- Used boot0so and u-boot binaries from Ayufan's boot-tools repo
- Decompiled sun50i-a64-pine64-sopine.dtb from the same repo and enabled the audio devices

[baumbachandrew]

Solved!

- Upgraded to Ayufan's 3.10.105-bsp-1.2+ kernel repo
- Used boot0so and u-boot binaries from Ayufan's boot-tools repo
- Decompiled sun50i-a64-pine64-sopine.dtb from the same repo and enabled the audio devices

Could you post a tutorial on how to do this? I am interested in getting my emmc working as well.

[gkkpch]

this is not something done quickly with a tutorial I'm afraid, I use my own scripts for building a volumio-specific image (volumio.org)