Trying to follow the Jumpdrive flashing instructions on the Mobian Wiki and have run into a wall.
Once I run "blkid" to list the devices, I get a list of 10 devices in the phone.
Which one do I direct bmap to?
I was told to flash to, for example, /dev/sde rather than /dev/sdeX as in:
sudo bmaptool copy mobian-pinephone-20200805.img.gz /dev/sde
This gets an error that the dev is busy... and I can't unmount it. I'm afraid to just pick one of the partitions because I don't know what will happen if I use the wrong one.
These are my options:
sde 8:64 1 14.7G 0 disk
├─sde1 8:65 1 1.9M 0 part
├─sde2 8:66 1 1M 0 part /run/media/binky/b93cc654-5b81-4149-b3d2-b37e
├─sde3 8:67 1 8M 0 part /run/media/binky/62f503f8-03ae-477c-9ca1-908c
├─sde4 8:68 1 64M 0 part /run/media/binky/ceb00a06-e590-4426-8072-71cf
├─sde5 8:69 1 64.3M 0 part
├─sde6 8:70 1 63.9M 0 part /run/media/binky/6c7b502b-e5af-4ede-8b76-8dcb
├─sde7 8:71 1 63.9M 0 part
├─sde8 8:72 1 2.4G 0 part /run/media/binky/cache
├─sde9 8:73 1 2.4G 0 part /run/media/binky/db17074a-eb35-43cc-b22d-bce9
└─sde10 8:74 1 8.6G 0 part /run/media/binky/userdata
Is anybody able to help me?
