ROCK64 STEREO AUDIO DAC ADD-ON BOARD and USB serial adapter for Pine64
#1
I noticed that the pine store has the following,
PINE64 USB SERIAL CONSOLE/PROGRAMMER - https://www.pine64.org/?product=pine64-u...programmer

Will this function as designed via the serial adapter on the Stereo Audio DAC Add-on Board?

Also, if the Serial Console/Programmer peripheral does work with the Stereo Audio DAC Add-on Board, may I use it (if even in a limited way) as an additional USB adapter? (I suspect not, but I wanted to be sure, and confirm or clarify my (mis)understandings.)
  Reply
#2
(11-28-2018, 03:06 AM)jovval Wrote: I noticed that the pine store has the following,
PINE64 USB SERIAL CONSOLE/PROGRAMMER - https://www.pine64.org/?product=pine64-u...programmer

Will this function as designed via the serial adapter on the Stereo Audio DAC Add-on Board?

Also, if the Serial Console/Programmer peripheral does work with the Stereo Audio DAC Add-on Board, may I use it (if even in a limited way) as an additional USB adapter? (I suspect not, but I wanted to be sure, and confirm or clarify my (mis)understandings.)

PINE64 USB SERIAL CONSOLE/PROGRAMMER design for PINE A64 board that has EXP port.

For ROCK64, please use the PADI serial console, https://www.pine64.org/?product=padi-serial-console

However, the Audi DAC board header occupied the UART pins and you will been to solder three pins (Rx, Tx, and Gnd) to access into console.
  Reply
#3
I have the PADI serial console and I find it works nicely. (I should have mentioned as much.)

(1) The pins on the AUDIO DAC ADD-ON BOARD's UART connection are not soldered?
That is, are they just for appearances? The pins presently connect to nothing?
Seems strange, but upon scrutinizing the board, I can see no leads to its UART receptacle.

(2) Were I properly to solder a 5V connection (in addition to the others) to the UART connection, is there any way (that you see, with code) to convert this UART to a USB 1.x-compatible output?
I am really only considering USB 1.x speeds. At the very least, I wonder if I could arrange having a keyboard attached thusly.
Yeah, this would be a significant effort, and I would more logically just use a USB 2.0 hub on one of the extant ports (but connection via a hub may not be possible for some fussy hardware). I am just curious about its feasibility.
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Are HW design files available for ROCK64? irenek 2 2,491 06-15-2022, 07:06 AM
Last Post: Brant454
  Where can I find the ROCK64 POE HAT Zoz 2 123 06-08-2022, 12:44 AM
Last Post: Zoz
  Audio Pot Board Questions vfr400racer 2 255 04-18-2022, 01:23 PM
Last Post: vfr400racer
Smile wooden case for ROCK64 killor 13 9,792 03-04-2022, 06:56 AM
Last Post: killor
  1wire DS18b20 on Rock64? mypineme 6 2,980 09-28-2021, 03:07 PM
Last Post: TRS-80
Information How to Setup Serial Console Cable Over the Rock64 SBC MarkHaysHarris777 9 24,733 09-28-2021, 10:52 AM
Last Post: lewiscamron72
  Rock64 4K60P HDR Media Board Computer 64 bit MarkHaysHarris777 8 12,088 07-14-2021, 11:52 PM
Last Post: jontumontu
  Any way to tell the rock64's hardware revision? kittyland 1 1,300 07-01-2021, 09:42 PM
Last Post: evilbunny
  Configuring Python GPIO Pin Control Rock64 www139 3 5,168 06-22-2021, 06:57 AM
Last Post: Mrfixit2001
  POE support for the Rock64 v3 h64poe 0 994 05-30-2021, 07:40 AM
Last Post: h64poe

Forum Jump:


Users browsing this thread: 1 Guest(s)