Complete blueprint of the Pine
#1
Question 
Has anyone been able to get their hands on the blueprint for the board? I need to know some dimmensions for my enclosure project.
Like the exact placement of the mounting holes, and other stuff like the HDMI, USB, power connector and so on.
I allso need to know the plazement on the Z-axis, preferably from the bottom of the PCB to the top of each part.
An accurate measurement of the components will allso help me get this enclosure right on the first try. (It will be to expensive to get it wrong since I have to outsource the making of the enclosure. I dont have he right tools needed)

I looked at the wiki page, but could only find a PDF with the outer dimmensions of the PCB, nothing more.

It will be possible to calculate the placement of the mounting holes and connectors, but the Z-axis is impossible to know anything about.
  Reply
#2
(02-15-2016, 04:18 AM)Tarjei85 Wrote: Has anyone been able to get their hands on the blueprint for the board? I need to know some dimmensions for my enclosure project.
Like the exact placement of the mounting holes, and other stuff like the HDMI, USB, power connector and so on.
I allso need to know the plazement on the Z-axis, preferably from the bottom of the PCB to the top of each part.
An accurate measurement of the components will allso help me get this enclosure right on the first try. (It will be to expensive to get it wrong since I have to outsource the making of the enclosure. I dont have he right tools needed)

I looked at the wiki page, but could only find a PDF with the outer dimmensions of the PCB, nothing more.

It will be possible to calculate the placement of the mounting holes and connectors, but the Z-axis is impossible to know anything about.

The Chinese New Year break almost over and we have also gear up to provide more info. The detail board dimension is one of the top job. We current also work on the board 3D modeling and hopefully able to provide soon.
  Reply
#3
(02-15-2016, 05:55 AM)tllim Wrote:
(02-15-2016, 04:18 AM)Tarjei85 Wrote: Has anyone been able to get their hands on the blueprint for the board? I need to know some dimmensions for my enclosure project.
Like the exact placement of the mounting holes, and other stuff like the HDMI, USB, power connector and so on.
I allso need to know the plazement on the Z-axis, preferably from the bottom of the PCB to the top of each part.
An accurate measurement of the components will allso help me get this enclosure right on the first try. (It will be to expensive to get it wrong since I have to outsource the making of the enclosure. I dont have he right tools needed)

I looked at the wiki page, but could only find a PDF with the outer dimmensions of the PCB, nothing more.

It will be possible to calculate the placement of the mounting holes and connectors, but the Z-axis is impossible to know anything about.

The Chinese New Year break almost over and we have also gear up to provide more info. The detail board dimension is one of the top job. We current also work on the board 3D modeling and hopefully able to provide soon.

That sounds superb. Looking forward to finishing my model and get it into production (me and some friends are going for the same design).
The eclosure is posted and updated here http://forum.pine64.org/showthread.php?tid=281
  Reply
#4
Thumbs Up 
Looking forward to a  blueprint!  Big Grin
  Reply
#5
How are things going with the blueprints of the Pine?
I'm in desperate need for the placement and dimmensions of the connectors for the pine.
Once I get these my Mario Enclosure is going into production...
  Reply
#6
(02-22-2016, 08:11 AM)Tarjei85 Wrote: How are things going with the blueprints of the Pine?
I'm in desperate need for the placement and dimmensions of the connectors for the pine.
Once I get these my Mario Enclosure is going into production...

Try to available on this week.
  Reply
#7
(02-22-2016, 09:12 AM)tllim Wrote:
(02-22-2016, 08:11 AM)Tarjei85 Wrote: How are things going with the blueprints of the Pine?
I'm in desperate need for the placement and dimmensions of the connectors for the pine.
Once I get these my Mario Enclosure is going into production...

Try to available on this week.

I really hope so.
Thank you  Big Grin
  Reply
#8
I need this information also, for all the same reasons. I have an OpenSCAD model that is complete except for the accurate placement of connector cutouts. Waiting for the data.

In addition, I am willing to upload the source code and STL file, but posting them in the forum seems like the wrong place. How do I get these files available for others to use?
  Reply
#9
(02-23-2016, 01:25 PM)brf Wrote: I need this information also, for all the same reasons.  I have an OpenSCAD model that is complete except for the accurate placement of connector cutouts.  Waiting for the data.

In addition, I am willing to upload the source code and STL file, but posting them in the forum seems like the wrong place.  How do I get these files available for others to use?

I have put mine in a shared folder on my OneDrive account. It works OK, but its not optimal. If you come over a better solution please let me know.
  Reply
#10
Is there any update on the blueprints of the board? Still no update on the wiki-page..
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
Photo C4 Labs Pine 64 Cases (Standard & LCD) Bluphire 95 50,594 11-02-2020, 08:43 PM
Last Post: Little_Johnny
  Clear case PIne 64 with VESA100 LIPO , RTC holder, and mini fan holes killor 6 4,581 08-05-2017, 07:15 AM
Last Post: killor
  New Pine 64 Screen Case from C4Labs Dustin_C4Labs 11 6,847 07-18-2017, 10:39 AM
Last Post: tllim
Information Giving the Pine a trunk, a Playbox pedestal tommypine 7 3,455 07-16-2017, 01:51 AM
Last Post: selina3
  Do Pine sell a tablet back cover? brucezepplin 4 2,645 12-20-2016, 08:24 AM
Last Post: Bluphire
  Pine 64 in a pine box :) sgjava 5 3,906 11-18-2016, 12:24 AM
Last Post: MarkHaysHarris777
  Suggestion for future cases from Pine evdboogerd 2 1,770 09-07-2016, 05:05 PM
Last Post: typerod
  LaserCut Pine Enclosure Macrois 10 6,109 08-31-2016, 01:24 PM
Last Post: Tarjei85
Video Acrylic enclosure for PINE A64 killor 71 33,034 08-12-2016, 06:53 AM
Last Post: killor
Question Solid Model/Accurate Blueprint Atomkinder 12 7,388 06-11-2016, 03:35 AM
Last Post: knightridar

Forum Jump:


Users browsing this thread: 1 Guest(s)