07-12-2018, 06:42 PM
(07-10-2018, 01:41 PM)Poincare Wrote:(06-25-2018, 07:25 PM)xecutioner Wrote:(06-25-2018, 01:48 PM)Luke Wrote: Just a heads-up, looks like the eMMC boot image is iffy on some boards. In other words, it may not work 100%. SD boot works fine however.
I have burned the EMMC version several times using the PINE64 Software Installer. In each case, the Rock64 will not boot. The small lights come on and it appears that the board is active, however, there is no output from the HDMI. I have repeated this 10 times now; in each case the MD5SUM matches the download and there is no problem with PINE64 Software Installer flashing the EMMC. In all cases, I have left the board to boot for up to 60 minutes without output. It is not functioning.
EDIT: By using Etcher and not the pINE64 Software Installer, I was able to successfully flash the EMMC and the Rock64 boots into Android 8.1. However, the system image only has 8gb, with about 3GB free. I have a 32GB EMMC card and want to expand the filesystem to use the full EMMC. There are no tools in the supplied Android image nor can I find any available to expanding Android 8.1 to full EMMC capacity.
Anyone know how to expand the Android 8.1 partition from the stock EMMC image to full EMMC capacity?
I would like to know the answer to this as well..
