Weatherproof case build

[ltorsini]

I've added the temp/humidity and photocell boards to the case.  Now we just need a solution to run these with the Android platform.

Humidity/temp sensor. A little black RTV on the o-ring and this unit will seal watertight, the o-ring is just thick enough to keep the pins from grounding on the case.


A blob of clear silicone to protect the pins from shorting and adhering to the case. 
Photocell at the right.


Add a fine mesh screen between the humidity/temp sensor to keep the debris infiltration to a minimum, clear plastic on the photocell.


Mesh guard from the front; to keep the bits out



Glued to the case with silicone, sealed up and wired - ready to run.


A couple new, small penetrations for the case.




Sent from my iPhone using Tapatalk