U-Boot with direct NVMe boot support for eMMC/SPI Flash

[mamboman777]

Thanks for the encouragement.  Making a backup now.  

Just to be clear, you are saying I should follow instructions from this, right?  https://github.com/pcm720/u-boot-build-scripts

No, his earlier, rockchip-based uboot has this command for writing to SPI:

Code:

sudo dd if=spiflash.bin of=/dev/mtd0

Looking at the build script of the most recent (your link,) that spiflash.bin will be in your build folder.

Ok.  Still seeking clarification as I'd really like this to work the first time.  1. Download and extract from https://github.com/pcm720/u-boot-build-scripts
2. Run build.sh
3. then run "sudo dd if=spiflash.bin of=/dev/mtd0

If this is already documented someplace, I apologize, but could you please point me in the right direction.  

Thanks!