Kernel for A64 git

janjwerner · 03-24-2016, 06:42 PM

(03-24-2016, 01:16 PM)falk.ben@gmail.com Wrote:
(03-23-2016, 12:51 PM)janjwerner Wrote:
(03-19-2016, 03:32 PM)longsleep Wrote: I pushed another Kernel build to support the smallest 512MB Pine64 model (with another device tree). Some other minor build changes have landed as well, see the first post for details.

Get 3.10.65-3-pine64-longsleep-2 from https://www.stdin.xyz/downloads/people/l...ges/linux/

Update like this (as root) on any of my images:

Code:
bash <(curl -s https://raw.githubusercontent.com/longsleep/build-pine64-image/master/simpleimage/platform-scripts/pine64_update_uboot.sh) bash <(curl -s https://raw.githubusercontent.com/longsleep/build-pine64-image/master/simpleimage/platform-scripts/pine64_update_kernel.sh)

If you update U-Boot as well you will get automatic Pine64 model detection, making the image also work with networking on the non-plus Pine64 automatically when you remove the fixed dtb filename from the existing /boot/uEnv.txt.

Image works like a charm on 512mb model.
As for the ethernet functioning:
Iperf3 between Pine+ (server) and Pine (client)
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth Retr
[ 4] 0.00-30.00 sec 337 MBytes 94.2 Mbits/sec 20 sender
[ 4] 0.00-30.00 sec 337 MBytes 94.2 Mbits/sec receiver

two boards connected to same gigabit switch.

That's great that it's working! Just for comparison, also using iperf3, using a windows desktop with GigE and pine64+ I get:

664 Mbit/s with pine64+ as server
371 Mbit/s with pine64+ as client

Thought it was interesting that there was asymmetry. Perhaps CPU bound?

check out the post:
http://forum.pine64.org/showthread.php?t...09#pid3009
and how multithreading affects it.
cheers

keiothic · 03-30-2016, 03:00 PM

Hi, sorry if I'm crashing thread with unrelated topic, but with a linux OS on Pine64, does that mean wi-fi/BT USB dongle will work? It's taking forever for the wi-fi/BT daughter board to be released and the store opening date is unknown at this point. Thanks!

ak_hepcat · (This post was last modified: 03-30-2016, 06:30 PM by ak_hepcat.)

New member! I've tried to read up before posting my question.

I just received my new Pine64, installed the base system and kernel (thanks longsleep!) and booted just fine. Video was wonky, but that's apparently known.

I saw an updated kernel available, as well as the updated uboot, so using the method above I went ahead and installed them.

Well, i didn't get far, because I couldn't boot anymore.

After hooking up a serial console (hooray for my BusPirate 4.0!) I saw that uboot wasn't able to boot the new kernel.
I was able to boot the old kernel manually, and set out to find out why.

Here's the old kernel that boots just fine:
root@p64:/boot# od -xa old/kernel.img |head
0000000 4e41 5244 494f 2144 30c0 00c9 0000 4108
A N D R O I D ! @ 0 I nul nul nul bs A
0000020 0000 0000 0000 4100 0000 0000 0000 40f0
nul nul nul nul nul nul nul A nul nul nul nul nul nul p @
0000040 0100 4000 0800 0000 0000 0000 0000 0000
nul soh nul @ nul bs nul nul nul nul nul nul nul nul nul nul
0000060 6950 656e 3436 0000 0000 0000 0000 0000
P i n e 6 4 nul nul nul nul nul nul nul nul nul nul
0000100 0000 0000 0000 0000 0000 0000 0000 0000
nul nul nul nul nul nul nul nul nul nul nul nul nul nul nul nul

And the newly installed kernel:

root@p64:/boot# od -xa pine64/Image |head
0000000 0010 1400 0000 0000 0000 0008 0000 0000
dle nul nul dc4 nul nul nul nul nul nul bs nul nul nul nul nul
0000020 0000 0000 0000 0000 0000 0000 0000 0000
nul nul nul nul nul nul nul nul nul nul nul nul nul nul nul nul
*
0000060 0000 0000 0000 0000 5241 644d 0000 0000
nul nul nul nul nul nul nul nul A R M d nul nul nul nul
0000100 0015 d280 03f5 2a00 0012 9400 0094 9400
nak nul nul R u etx nul * dc2 nul nul dc4 dc4 nul nul dc4
0000120 0050 9400 0016 d538 03e0 aa16 0121 9400

So, the magic at the beginning of the file is different. Too different apparently for uboot?

here's what my environment looks like, using the new kernel:
sunxi#setenv kernel_filename pine64/Image
sunxi#printenv
baudrate=115200
boot_kernel=boota ${kernel_addr}
bootargs=console=tty0 console=ttyS0,115200n8 no_console_suspend earlycon=uart,mmio32,0x01c28000 root=/dev/mmcblk0p2 rw rootwait
bootcmd=run mmcbootcmd
bootdelay=3
bootenv_filename=uEnv.txt
bootscript=run load_dtb load_kernel set_cmdline boot_kernel
console=tty0 console=ttyS0,115200n8 no_console_suspend
fdt_addr=45000000
fdt_filename=pine64/sun50i-a64-pine64-plus.dtb
fdtaddr=45000000
filesize=c94000
import_bootenv=env import -t ${load_addr} ${filesize}
initrd_filename=initrd.img
kernel_addr=4107f800
kernel_filename=pine64/Image
load_addr=41000000
load_bootenv=fatload mmc 0:1 ${load_addr} ${bootenv_filename}
load_dtb=fatload mmc 0:1 ${fdt_addr} ${fdt_filename}; fdt addr ${fdt_addr}; fdt resize
load_kernel=fatload mmc 0:1 ${kernel_addr} ${kernel_filename}
mmcbootcmd=if run load_bootenv; then echo Loading boot environment ...; run import_bootenv; fi; run bootscript
pine64_model=pine64-plus
root=/dev/mmcblk0p2
set_cmdline=setenv bootargs console=${console} earlycon=uart,mmio32,0x01c28000 root=${root} rw rootwait
sunxi_serial=0410519008044810020b

and here's the boot with 3.10.65-3-pine64-longsleep-2

sunxi#run bootscript
[mmc]: Has init
[ 119.367]---drivers/mmc/mmc.c 2733 mmc_init
reading pine64/sun50i-a64-pine64-plus.dtb
69174 bytes read in 18 ms (3.7 MiB/s)
[mmc]: Has init
[ 119.430]---drivers/mmc/mmc.c 2733 mmc_init
reading pine64/Image
11302096 bytes read in 556 ms (19.4 MiB/s)
1
boota: bad boot image magic, maybe not a boot.img?

is this a *me* issue that I can correct with some uEnv tweaking, or something different?

*** edit

there's 2059 bytes of 'header' at the beginning of the old kernel image that's not on the new Image.
transplanting this header creates a file that is recognized, but doesn't work (presumably it doesn't have the right offsets, or some other data)

janjwerner · 03-30-2016, 07:47 PM

(03-30-2016, 06:18 PM)ak_hepcat Wrote: New member! I've tried to read up before posting my question.

I just received my new Pine64, installed the base system and kernel (thanks longsleep!) and booted just fine. Video was wonky, but that's apparently known.

I saw an updated kernel available, as well as the updated uboot, so using the method above I went ahead and installed them.

Well, i didn't get far, because I couldn't boot anymore.

After hooking up a serial console (hooray for my BusPirate 4.0!) I saw that uboot wasn't able to boot the new kernel.
I was able to boot the old kernel manually, and set out to find out why.

Here's the old kernel that boots just fine:
root@p64:/boot# od -xa old/kernel.img |head
0000000 4e41 5244 494f 2144 30c0 00c9 0000 4108
A N D R O I D ! @ 0 I nul nul nul bs A
0000020 0000 0000 0000 4100 0000 0000 0000 40f0
nul nul nul nul nul nul nul A nul nul nul nul nul nul p @
0000040 0100 4000 0800 0000 0000 0000 0000 0000
nul soh nul @ nul bs nul nul nul nul nul nul nul nul nul nul
0000060 6950 656e 3436 0000 0000 0000 0000 0000
P i n e 6 4 nul nul nul nul nul nul nul nul nul nul
0000100 0000 0000 0000 0000 0000 0000 0000 0000
nul nul nul nul nul nul nul nul nul nul nul nul nul nul nul nul

And the newly installed kernel:

root@p64:/boot# od -xa pine64/Image |head
0000000 0010 1400 0000 0000 0000 0008 0000 0000
dle nul nul dc4 nul nul nul nul nul nul bs nul nul nul nul nul
0000020 0000 0000 0000 0000 0000 0000 0000 0000
nul nul nul nul nul nul nul nul nul nul nul nul nul nul nul nul
*
0000060 0000 0000 0000 0000 5241 644d 0000 0000
nul nul nul nul nul nul nul nul A R M d nul nul nul nul
0000100 0015 d280 03f5 2a00 0012 9400 0094 9400
nak nul nul R u etx nul * dc2 nul nul dc4 dc4 nul nul dc4
0000120 0050 9400 0016 d538 03e0 aa16 0121 9400

So, the magic at the beginning of the file is different. Too different apparently for uboot?

here's what my environment looks like, using the new kernel:
sunxi#setenv kernel_filename pine64/Image
sunxi#printenv
baudrate=115200
boot_kernel=boota ${kernel_addr}
bootargs=console=tty0 console=ttyS0,115200n8 no_console_suspend earlycon=uart,mmio32,0x01c28000 root=/dev/mmcblk0p2 rw rootwait
bootcmd=run mmcbootcmd
bootdelay=3
bootenv_filename=uEnv.txt
bootscript=run load_dtb load_kernel set_cmdline boot_kernel
console=tty0 console=ttyS0,115200n8 no_console_suspend
fdt_addr=45000000
fdt_filename=pine64/sun50i-a64-pine64-plus.dtb
fdtaddr=45000000
filesize=c94000
import_bootenv=env import -t ${load_addr} ${filesize}
initrd_filename=initrd.img
kernel_addr=4107f800
kernel_filename=pine64/Image
load_addr=41000000
load_bootenv=fatload mmc 0:1 ${load_addr} ${bootenv_filename}
load_dtb=fatload mmc 0:1 ${fdt_addr} ${fdt_filename}; fdt addr ${fdt_addr}; fdt resize
load_kernel=fatload mmc 0:1 ${kernel_addr} ${kernel_filename}
mmcbootcmd=if run load_bootenv; then echo Loading boot environment ...; run import_bootenv; fi; run bootscript
pine64_model=pine64-plus
root=/dev/mmcblk0p2
set_cmdline=setenv bootargs console=${console} earlycon=uart,mmio32,0x01c28000 root=${root} rw rootwait
sunxi_serial=0410519008044810020b

and here's the boot with 3.10.65-3-pine64-longsleep-2

sunxi#run bootscript
[mmc]: Has init
[ 119.367]---drivers/mmc/mmc.c 2733 mmc_init
reading pine64/sun50i-a64-pine64-plus.dtb
69174 bytes read in 18 ms (3.7 MiB/s)
[mmc]: Has init
[ 119.430]---drivers/mmc/mmc.c 2733 mmc_init
reading pine64/Image
11302096 bytes read in 556 ms (19.4 MiB/s)
1
boota: bad boot image magic, maybe not a boot.img?

is this a *me* issue that I can correct with some uEnv tweaking, or something different?

*** edit

there's 2059 bytes of 'header' at the beginning of the old kernel image that's not on the new Image.
transplanting this header creates a file that is recognized, but doesn't work (presumably it doesn't have the right offsets, or some other data)

@longsleep correct me if I'm wrong Smile

I think you have a uboot / kernel mismatch. The latest image provided by @longsleep should boot using booti and kernel does not require the Android magic header.

For the previous message in the thread - the Linux image supports the WiFi part of that adapter, I am not sure about the bluetooth.

patrickhwood · 03-31-2016, 08:49 AM

If your boot script is using boota in boot_kernel; boota expects an android image with the ANDROID! magic header, so looks like you're either using an incompatible uboot or perhaps boot_kernel should be reset by uEnv.txt but isn't.

longsleep · 03-31-2016, 10:42 AM

Maybe you have saved the environment uboot.env with the old settings. Remove that file. If thats not it, you u-boot update did not work and you should try again.

ak_hepcat · 03-31-2016, 11:58 AM

(03-31-2016, 10:42 AM)longsleep Wrote: Maybe you have saved the environment uboot.env with the old settings. Remove that file. If thats not it, you u-boot update did not work and you should try again.

Ah!

I removed the uboot.env, forced a u-boot update, made sure my uEnv configs were correct and reboot.

this time, the new -3 kernel booted.

until it died:

* Starting Mount network filesystems[ OK ]
* Starting Failsafe Boot Delay[ OK ]
* Stopping Mount network filesystems[ OK ]
* Starting configure network device[ OK ]
* Starting Bridge file events into upstart[ OK ]
* Starting Bridge socket events into upstart[ OK ]
* Stopping cold plug devices[ OK ]
[   15.967213] [VFE_ERR]Error registering v4l2 subdevice No such device!
[   15.974631] [VFE_ERR]vfe sensor register check error at input_num = 0
* Stopping log initial device c[   15.981968] [VFE_ERR]Error registering v4l2 subdevice No such device!
reation[ OK ]
[   15.981971] [VFE_ERR]vfe sensor register check error at input_num = 1
* Starting configure network device security[ OK ]
* Starting save udev log and update rules[ OK ]
* Stopping save udev log and update rules[ OK ]
[   20.669360] Unable to handle kernel paging request at virtual address ffffffbf76510840
[   20.678185] pgd = ffffffc076752000
[   20.681962] [ffffffbf76510840] *pgd=0000000000000000
[   20.691412] Internal error: Oops: 96000145 [#1] PREEMPT SMP
[   20.701470] Modules linked in: vfe_v4l2 videobuf2_dma_contig videobuf2_memops 8723bs videobuf2_core vfe_io ss cedar_ve mali(O) cfg80211
[   20.719067] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G           O 3.10.65-3-pine64-longsleep #2
[   20.732764] task: ffffffc000a00910 ti: ffffffc0009f4000 task.ti: ffffffc0009f4000
[   20.745343] PC is at __dma_inv_range+0x20/0x50
[   20.754606] LR is at __swiotlb_unmap_page+0x50/0x7c
[   20.764345] pc : [<ffffffc000095c80>] lr : [<ffffffc000094e00>] pstate: 00000145
[   20.776991] sp : ffffffc0009f7b90
[   20.785143] x29: ffffffc0009f7b90 x28: ffffffc000b4a000
[   20.795510] x27: 0000000000000001 x26: ffffffc0777f58a8
[   20.805853] x25: ffffffc0777f5800 x24: 0000000000000040
[   20.816207] x23: 0000000000000000 x22: ffffffc077503010
[   20.826540] x21: 0000000000000002 x20: 00000000000007ff
[   20.836913] x19: ffffffffb7510042 x18: 0000007f7fbe33e0
[   20.847260] x17: 0000007f80ead280 x16: ffffffc0001032b4
[   20.857618] x15: 001d9f7eb0986bd2 x14: ffffffc076c39740
[   20.867942] x13: ffffffc07566ca00 x12: ffffffc000751000
[   20.878241] x11: 0000000000000005 x10: 0000000000000007
[   20.888518] x9 : 000000000000000e x8 : 000000000000000c
[   20.898732] x7 : ffffffc000094db0 x6 : ffffffc077503010
[   20.908952] x5 : 00000000d6d6a3e8 x4 : 0000000000000000
[   20.919185] x3 : 000000000000003f x2 : 0000000000000040
[   20.929403] x1 : ffffffbf76510840 x0 : ffffffbf76510042

Guess i'm getting closer! (too bad it's in a different building - i'll have to wait until this afternoon to physically powercycle)

DaveKram · (This post was last modified: 04-01-2016, 07:22 AM by DaveKram.)

(03-31-2016, 11:58 AM)ak_hepcat Wrote:
(03-31-2016, 10:42 AM)longsleep Wrote: Maybe you have saved the environment uboot.env with the old settings. Remove that file. If thats not it, you u-boot update did not work and you should try again.

Ah!

I removed the uboot.env, forced a u-boot update, made sure my uEnv configs were correct and reboot.

this time, the new -3 kernel booted.

until it died:

* Starting Mount network filesystems[ OK ]
* Starting Failsafe Boot Delay[ OK ]
* Stopping Mount network filesystems[ OK ]
* Starting configure network device[ OK ]
* Starting Bridge file events into upstart[ OK ]
* Starting Bridge socket events into upstart[ OK ]
* Stopping cold plug devices[ OK ]
[   15.967213] [VFE_ERR]Error registering v4l2 subdevice No such device!
[   15.974631] [VFE_ERR]vfe sensor register check error at input_num = 0
* Stopping log initial device c[   15.981968] [VFE_ERR]Error registering v4l2 subdevice No such device!
reation[ OK ]
[   15.981971] [VFE_ERR]vfe sensor register check error at input_num = 1
* Starting configure network device security[ OK ]
* Starting save udev log and update rules[ OK ]
* Stopping save udev log and update rules[ OK ]
[   20.669360] Unable to handle kernel paging request at virtual address ffffffbf76510840
[   20.678185] pgd = ffffffc076752000
[   20.681962] [ffffffbf76510840] *pgd=0000000000000000
[   20.691412] Internal error: Oops: 96000145 [#1] PREEMPT SMP
[   20.701470] Modules linked in: vfe_v4l2 videobuf2_dma_contig videobuf2_memops 8723bs videobuf2_core vfe_io ss cedar_ve mali(O) cfg80211
[   20.719067] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G           O 3.10.65-3-pine64-longsleep #2
[   20.732764] task: ffffffc000a00910 ti: ffffffc0009f4000 task.ti: ffffffc0009f4000
[   20.745343] PC is at __dma_inv_range+0x20/0x50
[   20.754606] LR is at __swiotlb_unmap_page+0x50/0x7c
[   20.764345] pc : [<ffffffc000095c80>] lr : [<ffffffc000094e00>] pstate: 00000145
[   20.776991] sp : ffffffc0009f7b90
[   20.785143] x29: ffffffc0009f7b90 x28: ffffffc000b4a000
[   20.795510] x27: 0000000000000001 x26: ffffffc0777f58a8
[   20.805853] x25: ffffffc0777f5800 x24: 0000000000000040
[   20.816207] x23: 0000000000000000 x22: ffffffc077503010
[   20.826540] x21: 0000000000000002 x20: 00000000000007ff
[   20.836913] x19: ffffffffb7510042 x18: 0000007f7fbe33e0
[   20.847260] x17: 0000007f80ead280 x16: ffffffc0001032b4
[   20.857618] x15: 001d9f7eb0986bd2 x14: ffffffc076c39740
[   20.867942] x13: ffffffc07566ca00 x12: ffffffc000751000
[   20.878241] x11: 0000000000000005 x10: 0000000000000007
[   20.888518] x9 : 000000000000000e x8 : 000000000000000c
[   20.898732] x7 : ffffffc000094db0 x6 : ffffffc077503010
[   20.908952] x5 : 00000000d6d6a3e8 x4 : 0000000000000000
[   20.919185] x3 : 000000000000003f x2 : 0000000000000040
[   20.929403] x1 : ffffffbf76510840 x0 : ffffffbf76510042

Guess i'm getting closer! (too bad it's in a different building - i'll have to wait until this afternoon to physically powercycle)

That looks very much like the ethernet issue that we are talking about over here: http://forum.pine64.org/showthread.php?tid=376&page=6

You have an ethernet cord plugged in? And do you have the 2gb version?

ak_hepcat · 04-01-2016, 09:54 AM

(04-01-2016, 07:21 AM)DaveKram Wrote: That looks very much like the ethernet issue that we are talking about over here: http://forum.pine64.org/showthread.php?tid=376&page=6

You have an ethernet cord plugged in? And do you have the 2gb version?

Ah, son-of-a-!

yeah, i do have the 64+ 2GB, and did have ethernet plugged in.

I'll head over there and see if I can help out a little

longsleep · (This post was last modified: 04-03-2016, 03:46 AM by longsleep.)

Found the issue. Fixed in https://github.com/longsleep/linux-pine6...6021a4484f - will release a new Kernel build today.

I pushed a new Kernel build, fixing the Ethernet crash for 2GB Pine64+ models.

Get 3.10.65-4-pine64-longsleep-16 from https://www.stdin.xyz/downloads/people/l...ges/linux/

Update like this (as root) on any of my images:

Code:
bash <(curl -s https://raw.githubusercontent.com/longsleep/build-pine64-image/master/simpleimage/platform-scripts/pine64_update_uboot.sh)

bash <(curl -s https://raw.githubusercontent.com/longsleep/build-pine64-image/master/simpleimage/platform-scripts/pine64_update_kernel.sh)

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	PineA64+: Audio in 5.0 Kernel	puzzles	6	9,994	11-13-2019, 09:41 AM Last Post: roel
	Rockpro64 NFS root mount (kernel 4.20) - ethernet help?	tenspd137	0	3,171	12-06-2018, 01:14 AM Last Post: tenspd137
	NVMe and new kernel	bjbb17	0	2,850	09-25-2018, 03:39 PM Last Post: bjbb17
	Real-time linux kernel	Artyom	45	79,986	09-11-2018, 01:08 AM Last Post: zzwpine
	DKMS on kernel 3.10.107-pine64	obrienmd	5	9,471	06-21-2018, 05:45 PM Last Post: evilbunny
	Gentoo for pine64 - longsleep kernel	incoherent	0	3,859	12-09-2017, 08:14 AM Last Post: incoherent
	[SOLVED] UEFI + Fedora Mainline Kernel Booting!	cztian	0	3,584	07-13-2017, 08:38 PM Last Post: cztian
	Mainline kernel [Solved]	jeroen79	11	21,192	02-08-2017, 06:19 AM Last Post: umiddelb
	Need help : Issue in running compiled kernel with tftp+uboot	dinesh.bhoyar	2	5,097	01-30-2017, 12:44 AM Last Post: dinesh.bhoyar
	Jackd triggers kernel warning	cztian	0	3,732	09-03-2016, 08:16 AM Last Post: cztian

Login




Remember me Lost Password?

About Us