08-24-2017, 02:38 PM
(This post was last modified: 09-02-2017, 07:01 PM by TeaPack.)
Hi everyone =) I just made first version of CAD drawings of Rock64, heights of chips are not precise for making multi chip heatsinks, but I'll fix it during next week, maybe with all-in-one masive AL heatsink...
ver. 1 - All possible files available on my github (
https://github.com/TeaPackCZ/Rock64_drawings ) more info at
Full description ver 1
ver. 2 - Added DAC board and pictures of models, more info at
More info about ver. 2
____________________
Note: I'll edit this post to correspond with actual state...
If I posted something helpful, please rate +
(08-24-2017, 04:16 PM)MarkHaysHarris777 Wrote: (08-24-2017, 02:38 PM)TeaPack Wrote: Hi everyone =) I just made first version of CAD drawings of Rock64, heights of chips are not precise for making multi chip heatsinks, but I'll fix it during next week, maybe with all-in-one masive AL heatsink... I'll post STL / STEP files on demand
Nice work TeaPack !
... based on your own measurement, or based on specs from TLLim ? When will you publish the sources ? Will your drawings have the measurements on them eventually ?
Thanks , really nice work; especially for case designers 'n such.
It's based on my own measurements and some of them were taken on CNC mill with industrial touch probe (error +-3um) but I have to measure some parts again on multiple boards, to confirm placement with some tolerance...
Sources will be published ASAP, unfortunately current drawings are not compatible with Autodesk Fusion, that I want as one source, so I'll redraw it again ;
and I also plan to export some blueprints of it in PDF, hopefully all will be finished next week on my github
If I posted something helpful, please rate +
Hi All =) Version in Fusion is complete ;
Latest version of 3D model will be available at:
http://a360.co/2wa9KPm
Latest version of PDF drawings can be accessed via Autodesk link here:
http://a360.co/2vDLhP3
All possible files, that I'm able to dig from Fusion are also on mine github (
https://github.com/TeaPackCZ/Rock64_drawings )
(Unfortunately Fusion is totally cloud, so no IPTs available)
New look:
If I posted something helpful, please rate +
(08-30-2017, 07:03 PM)tllim Wrote: Thanks on teh awesome work. Can I get your permission and posted on PINE64 wiki page?
Sure
If I posted something helpful, please rate +
09-02-2017, 06:58 PM
(This post was last modified: 09-02-2017, 07:03 PM by TeaPack.)
Hi again ;
DAC board is also available in CAD ^.^ As accessory for Rock, it's in Rock64 repository on mine github posted above.
Links to Autodesk site - Model:
http://a360.co/2vBdUBx Assembly:
http://a360.co/2x14TBO Drawings:
http://a360.co/2x15l34
If I posted something helpful, please rate +