Sopine baseboard / A64 base board as OTG
#1
I've configured a Debian Armbian to do dummy_hcd and g_mass_storage. I currently have one of my sopine cluster compute modules in the A64 baseboard. I've been able to go through all the steps to set it up as gadget mass storage device. I've also made an OTG cable to plug this setup in to a usb port on another computer. But I am not sure if I have quite got this right at a hardware level. Will the USB on the A64 board let me do this? I have not got any over voltage errors from dmesg but it is not working either. Question was if the Sopine hardware combination will let me bring up a USB port as OTG in this way? 

( in case anybody is wondering why it was because I was exploring this as possible alternate root for cluster booting off the baseboard as opposed to configuring netboot and NTFS etc etc ) ...
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Sopine Fedora 32 on clusterboard w/networking revoman 0 233 06-10-2020, 12:09 PM
Last Post: revoman
  SoPine SPI booting ayufan 24 6,299 05-11-2020, 12:46 PM
Last Post: lbruno
  SOPINE Network boot Ninazu 1 145 05-11-2020, 12:40 PM
Last Post: lbruno
  LibreELEC(KODI) for LTS/ SOPine pineadmin 2 712 12-27-2019, 11:09 PM
Last Post: tllim
  Armbian - Xenial (SOPINE) pineadmin 6 5,506 08-05-2019, 01:17 AM
Last Post: pineadmin
  NEMS Linux for LTS/ SOPine Luke 1 518 05-09-2019, 05:46 PM
Last Post: pineadmin
  Volumio (PINE A64-LTS / SOPINE) pineadmin 1 1,555 01-18-2019, 04:42 PM
Last Post: Luke
  SoPine/Pine64 LTS: Ubuntu Mate is not booting jaganteki 0 430 11-20-2018, 10:49 PM
Last Post: jaganteki
  Arch Linux mainline XFCE (PINE A64-LTS / SOPINE) pineadmin 1 2,461 11-09-2018, 03:07 AM
Last Post: pineadmin
  Xenial Mate @ Sopine: no graphic acceleration & high CPU load AI_newsettler 0 378 08-11-2018, 10:26 AM
Last Post: AI_newsettler

Forum Jump:


Users browsing this thread: 1 Guest(s)