PCI-E add-on Success & Failures
#18
No problems with the controller so far. Rsynced 3.8 TB of data without any dmesg errors so far.
I think the btrfs scrub creates much more io load on the controller.

I will do some stress testing (copy several hundred GB between the connected ssds/hdd, may be in parallel) and let you know if there are errors.
Do you know a good method of stress testing a Sata-Controller?

greetings

Edit:
While doing some stress testing (copy 500GB from sw-raid1 to both ssds in parallel), the ugly error messages pop up several times in dmesg:

Code:
[177359.815846] ata1.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x6 frozen
[177359.818370] ata1.00: failed command: WRITE FPDMA QUEUED
[177359.820792] ata1.00: cmd 61/78:08:70:a3:04/00:00:1d:00:00/40 tag 1 ncq dma 6                                                                                 1440 out
                        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (time                                                                                 out)
[177359.826247] ata1.00: status: { DRDY }
[177359.828502] ata1: hard resetting link
[177360.145994] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[177360.150489] ata1.00: supports DRM functions and may not be fully accessible
[177360.153733] ata1.00: disabling queued TRIM support
[177360.156187] ata1.00: supports DRM functions and may not be fully accessible
[177360.159228] ata1.00: disabling queued TRIM support
[177360.160830] ata1.00: configured for UDMA/133
[177360.163081] ata1: EH complete
[177394.635885] ata1.00: exception Emask 0x0 SAct 0x40000 SErr 0x0 action 0x6 fr                                                                                 ozen
[177394.638381] ata1.00: failed command: READ FPDMA QUEUED
[177394.640550] ata1.00: cmd 60/08:90:08:08:c0/00:00:00:00:00/40 tag 18 ncq dma                                                                                  4096 in
                        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (time                                                                                 out)
[177394.645314] ata1.00: status: { DRDY }
[177394.647351] ata1: hard resetting link
[177394.963135] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[177394.967475] ata1.00: supports DRM functions and may not be fully accessible
[177394.970766] ata1.00: disabling queued TRIM support
[177394.973283] ata1.00: supports DRM functions and may not be fully accessible
[177394.979736] ata1.00: disabling queued TRIM support
[177394.981241] ata1.00: configured for UDMA/133
[177394.986826] ata1: EH complete

The SSDs recover from that and the cp processes are still going on.

Write speeds are limited by read speed of md0 (2xWD Red 6TB):

Code:
avg-cpu:  %user   %nice %system %iowait  %steal   %idle
          0.88    0.00   26.83   23.29    0.00   49.00

Device:            tps    MB_read/s    MB_wrtn/s    MB_read    MB_wrtn
mtdblock0         0.00         0.00         0.00          0          0
mtdblock1         0.00         0.00         0.00          0          0
mtdblock2         0.00         0.00         0.00          0          0
mmcblk1          35.00         0.15         0.00          0          0
mmcblk1boot1      0.00         0.00         0.00          0          0
mmcblk1boot0      0.00         0.00         0.00          0          0
mmcblk0           0.00         0.00         0.00          0          0
sdc             202.20         0.00       102.58          0        512
sdd             413.20       102.85         0.00        514          0
sdb             454.00       112.99         0.00        564          0
sda             372.20         0.00       118.66          0        593
md0             864.60       215.84         0.00       1079          0

The write speed drops down to zero, when a hard reset of the link happens.

This happens on both connected SSDs,not in parallel and not on the HDDs so far.

greetings


Messages In This Thread
PCI-E add-on Success & Failures - by macross_dyrl - 08-25-2018, 06:41 PM
RE: PCI-E add-on Success & Failures - by nuumio - 11-18-2018, 10:53 AM
RE: PCI-E add-on Success & Failures - by huey - 12-15-2018, 08:18 AM
RE: PCI-E add-on Success & Failures - by nuumio - 01-27-2019, 02:08 AM
RE: PCI-E add-on Success & Failures - by nuumio - 12-15-2018, 12:31 PM
RE: PCI-E add-on Success & Failures - by huey - 12-15-2018, 01:09 PM
RE: PCI-E add-on Success & Failures - by gokuz - 12-19-2018, 12:12 AM
RE: PCI-E add-on Success & Failures - by nuumio - 12-19-2018, 02:07 PM
RE: PCI-E add-on Success & Failures - by gokuz - 12-19-2018, 11:43 PM
RE: PCI-E add-on Success & Failures - by nuumio - 12-20-2018, 03:08 AM
RE: PCI-E add-on Success & Failures - by nuumio - 01-29-2019, 12:49 PM
RE: PCI-E add-on Success & Failures - by flocke196 - 01-30-2019, 01:03 PM
RE: PCI-E add-on Success & Failures - by nuumio - 02-02-2019, 11:00 AM
RE: PCI-E add-on Success & Failures - by huey - 03-05-2019, 12:51 PM
RE: PCI-E add-on Success & Failures - by ChNaed - 03-22-2019, 02:30 AM
RE: PCI-E add-on Success & Failures - by taube - 12-27-2019, 10:47 AM
RE: PCI-E add-on Success & Failures - by fysa - 02-19-2020, 09:05 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
Music No success with audio crmcalls 2 1,776 04-15-2021, 11:17 PM
Last Post: crmcalls
  4K Success? bprotas 1 2,384 08-08-2018, 06:22 AM
Last Post: gabrielsr

Forum Jump:


Users browsing this thread: 2 Guest(s)