PCI-E add-on Success & Failures
#7
(11-18-2018, 10:53 AM)nuumio Wrote:
(09-09-2018, 12:02 PM)xtract Wrote: I have been able run  a sata card based on Marvell 88SE9230, with 4 ports.

Kernel:
Linux rockpro64 4.18.0-rc8-1060-ayufan-g45828c4db727 #1 SMP PREEMPT Thu Aug 9 19:41:21 UTC 2018 aarch64 GNU/Linux

...

To get the rp64 I had to manually bind the ahci driver to the pcie card, adding a udev rule:

Code:
root@rockpro64:~# cat /etc/udev/rules.d/99-marvell.rules
RUN+="/bin/bash -c 'echo 0000:01:00.0 > /sys/bus/pci/drivers/ahci/bind'"



I have only tried with one drive yet, the second one is on its way  Rolleyes

I have Delock's 4 port SATA controller which is based on Marvell 88SE9230 chip too (https://www.delock.com/produkt/89395/merkmale.html). Got it working after adding binding to udev rules like above (thanks xtract). Having 4 WD Reds running so far without problems.

88SE9230 does get really hot though (at least on this card). Its little heat sink gets too hot to touch. I'm considering a cooling fan for it.

Code:
$ uname -a
Linux rockpro64 4.19.0-1073-ayufan-ga6e013135a6e #1 SMP PREEMPT Tue Oct 23 09:19:54 UTC 2018 aarch64 aarch64 aarch64 GNU/Linux

$ lspci -nn
00:00.0 PCI bridge [0604]: Rockchip Inc. RK3399 PCI Express Root Port Device [1d87:0100]
01:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9230 PCIe SATA 6Gb/s Controller [1b4b:9230] (rev 11)

$ lsblk -S
NAME HCTL       TYPE VENDOR   MODEL             REV TRAN
sda  0:0:0:0    disk ATA      WDC WD30EFRX-68N 0A82 sata
sdb  1:0:0:0    disk ATA      WDC WD30EFRX-68N 0A82 sata
sdc  2:0:0:0    disk ATA      WDC WD30EFRX-68N 0A82 sata
sdd  3:0:0:0    disk ATA      WDC WD30EFRX-68N 0A82 sata

$ cat /etc/udev/rules.d/99-local-last.rules 
ACTION=="add", SUBSYSTEM=="pci", ATTR{vendor}=="0x1b4b", ATTR{device}=="0x9230", RUN+="/bin/bash -c 'echo %k > /sys/bus/pci/drivers/ahci/bind'"

Using the same card but from IOCREST (same id's) but can not get it working. Followed same steps I think: SD Card with minimal bionic 7.9.0 (?) and switched mainline kernel 4.19.0-1073. But with and without udev rule it will not see my disk. I checked voltage on the power...
If I try to run eMMC image and switch to mainline kernel my rockpro does not boot anymore... keeps complaining and looping about EQC error? 
Tried to use serial console to see boot from the start, but that only gives me garbled code??

Is the pcie only visible with the mainline kernel or does someone have an easier route to a working adapter for me available?
Pfff, not sure what to do to understand whats wrong.

Regards


Messages In This Thread
PCI-E add-on Success & Failures - by macross_dyrl - 08-25-2018, 06:41 PM
RE: PCI-E add-on Success & Failures - by nuumio - 11-18-2018, 10:53 AM
RE: PCI-E add-on Success & Failures - by huey - 12-15-2018, 08:18 AM
RE: PCI-E add-on Success & Failures - by nuumio - 01-27-2019, 02:08 AM
RE: PCI-E add-on Success & Failures - by nuumio - 12-15-2018, 12:31 PM
RE: PCI-E add-on Success & Failures - by huey - 12-15-2018, 01:09 PM
RE: PCI-E add-on Success & Failures - by gokuz - 12-19-2018, 12:12 AM
RE: PCI-E add-on Success & Failures - by nuumio - 12-19-2018, 02:07 PM
RE: PCI-E add-on Success & Failures - by gokuz - 12-19-2018, 11:43 PM
RE: PCI-E add-on Success & Failures - by nuumio - 12-20-2018, 03:08 AM
RE: PCI-E add-on Success & Failures - by nuumio - 01-29-2019, 12:49 PM
RE: PCI-E add-on Success & Failures - by nuumio - 02-02-2019, 11:00 AM
RE: PCI-E add-on Success & Failures - by huey - 03-05-2019, 12:51 PM
RE: PCI-E add-on Success & Failures - by ChNaed - 03-22-2019, 02:30 AM
RE: PCI-E add-on Success & Failures - by taube - 12-27-2019, 10:47 AM
RE: PCI-E add-on Success & Failures - by fysa - 02-19-2020, 09:05 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
Music No success with audio crmcalls 2 1,774 04-15-2021, 11:17 PM
Last Post: crmcalls
  4K Success? bprotas 1 2,380 08-08-2018, 06:22 AM
Last Post: gabrielsr

Forum Jump:


Users browsing this thread: 1 Guest(s)