ROCK64 RTC
#21
Yes it did ,,.... with a bit more to be done,

Did a fix broken after and alot was installed .... then ran through the update, upgrade, dist-upgrade ...

Don't want to reboot until that was done, i was afraid that my removing all LibEGL.* might have bad repercussions when rebooting ....
  Reply
#22
I do not see any update to using a battery for RTC on newest Rock64 which was going to be utilized as an automation server combo firewall.

I have not used the Internet for time in over 15 years now and always used an NTP server with GPS / PPS. Over the years transitioned to using the PFSense box with a serial / PPS connection to a GPS which provides great time for me.

I am very particular about automation and time.

We are at the two year mark here.

Time to give up and move on.
Pete
Auto mator
  Reply
#23
(02-08-2019, 07:17 AM)petec Wrote: I do not see any update to using a battery for RTC on newest Rock64 which was going to be utilized as an automation server combo firewall.

I have not used the Internet for time in over 15 years now and always used an NTP server with GPS / PPS.  Over the years transitioned to using the PFSense box with a serial / PPS connection to a GPS which provides great time for me.

I am very particular about automation and time.

We are at the two year mark here.  

Time to give up and move on.

The issue due to the availability of PoE capable magnetic LAN which has very long lead time, 16-20 weeks lead time. We will starts phase in new revision on April.
  Reply
#24
I am a newbie and have a basic question. I am ordering both Rock64 and Rock64 boards and will be running a webserver on it in an environment without internet connection. Most probably the antenna will create a hotspot for the mobile devices to connect to it.
I will have to turn on and off the system almost every day. Will both the boards lose the date stamp when restarted provided the battery RTC is not there ?
Is there a way to keep the time up to date so that the browser running the webserver home page should not prompt for errors ..
Thank you
  Reply
#25
(02-11-2019, 11:36 AM)waqasnasir Wrote: I am a newbie and have a basic question.  I am ordering both Rock64 and Rock64 boards and will be running a webserver on it in an environment without internet connection.  Most probably the antenna will create a hotspot for the mobile devices to connect to it.
I will have to turn on and off the system almost every day.  Will both the boards lose the date stamp when restarted provided the battery RTC is not there ?
Is there a way to keep the time up to date so that the browser running the webserver home page should not prompt for errors ..
Thank you

Just don;t unplug teh power supply if need RTC keep working.
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
Shocked Rock64 - Reboots after few minutes addezai 2 154 04-22-2021, 07:03 PM
Last Post: addezai
  Python GPIO Library for the Rock64 (R64.GPIO) Leapo 36 34,652 04-17-2021, 08:59 AM
Last Post: theophile
Question Hardware issues with Rock64 grobbs 10 828 04-08-2021, 05:24 AM
Last Post: t4_4t
  Rock64 Long Term stability ramprasad 4 1,368 03-16-2021, 07:23 PM
Last Post: Rocklobster
  Rock64 No Audio - Solved wbecks 11 14,283 03-15-2021, 03:15 PM
Last Post: lowry
  Safest way to send shutdown signal to headless Rock64 SMB server? bmurphr1 3 800 03-14-2021, 06:01 PM
Last Post: clach04
  Rock64 as a router (OpenWRT,etc) bob-anon 2 1,277 03-12-2021, 01:16 AM
Last Post: arkadione
  Rock64 enable 1-wire to read DS18B20 or Dallas temperature sensor Perry 2 975 02-12-2021, 08:02 PM
Last Post: Perry
  Will Mobian Run On Rock64? Porcupine 1 467 01-13-2021, 12:39 PM
Last Post: tophneal
  Rock64 v2 as Openmediavault server - buffers / shutdown problems helpmerock 2 827 12-29-2020, 09:46 AM
Last Post: helpmerock

Forum Jump:


Users browsing this thread: 1 Guest(s)