PINE64   ›   PINE A64(+)   ›   Pine A64 Hardware, Accessories and POT   ›   Enclosures   ›   Super Mario case [NOW WITH UPDATED STL-FILE (April 27.)]

Super Mario case [NOW WITH UPDATED STL-FILE (April 27.)]
DarkstarSA
Pine Initiate
**
Joined: Apr 2016
Posts: 4

Reputation: 0
#34
05-04-2016, 03:28 AM (This post was last modified: 05-04-2016, 03:34 AM by DarkstarSA.)
Hey Captain, thanks for all the work you have done. I finally have time to start looking at this project. I looked at the latest repaired file and split it so I could work on it, side per side and I saw that I might run into some problems with 3d printing it, what type of supports do you suggest?
I was considering actually slicing each side in half, printing it and then gluing them together (that way the seem should be hardly noticeable). Is this what you would do or what do you suggest?
Oops, sorry, typo, it was meant to be hey Tarjei85 and later a thanks to Captain for the fixed file :-S
  Reply


Messages In This Thread
RE: Super Mario case - by Ghost - 02-11-2016, 09:22 AM
RE: Super Mario case - by Tarjei85 - 02-13-2016, 05:11 AM
RE: Super Mario case - by Tarjei85 - 02-13-2016, 05:00 PM
RE: Super Mario case - by Tarjei85 - 02-14-2016, 10:21 AM
RE: Super Mario case - by carb1a4h - 02-18-2016, 08:12 PM
RE: Super Mario case - by Tarjei85 - 02-19-2016, 04:52 AM
RE: Super Mario case - by Tarjei85 - 02-22-2016, 01:16 PM
RE: Super Mario case - by Ghost - 02-22-2016, 02:09 PM
RE: Super Mario case - by GoZone - 03-09-2016, 09:38 AM
RE: Super Mario case - by Tarjei85 - 03-09-2016, 10:27 AM
RE: Super Mario case - by GoZone - 03-24-2016, 08:57 AM
RE: Super Mario case - by Tarjei85 - 03-24-2016, 10:17 AM
RE: Super Mario case - by nomadewolf - 03-28-2016, 07:23 AM
RE: Super Mario case - by Tarjei85 - 03-29-2016, 04:31 AM
RE: Super Mario case - by CaptainZalo - 04-07-2016, 03:06 PM
RE: Super Mario case - by Tarjei85 - 04-08-2016, 02:19 AM
RE: Super Mario case - by Tarjei85 - 04-08-2016, 01:56 PM
RE: Super Mario case - by CaptainZalo - 04-08-2016, 02:39 PM
RE: Super Mario case - by Rhymoore - 04-08-2016, 03:41 AM
RE: Super Mario case - by Tarjei85 - 04-08-2016, 05:10 AM
RE: Super Mario case [NOW WITH UPDATED STL-FILE (April 27.)] - by DarkstarSA - 05-04-2016, 03:28 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Made a case for the Pine64 with Audio DAC installed kodachrome 1 3,977 11-12-2019, 04:52 AM
Last Post: xalius
  playbox case ribbon cable too short pinoosh 7 12,351 02-22-2019, 03:24 AM
Last Post: GaryFunk
Video 7" LCD wooden framen enclosure for Pine64 *UPDATED WITH killor 12 19,889 10-12-2018, 03:08 PM
Last Post: tllim
  Clear case PIne 64 with VESA100 LIPO , RTC holder, and mini fan holes killor 6 11,558 08-05-2017, 07:15 AM
Last Post: killor
  New Pine 64 Screen Case from C4Labs Dustin_C4Labs 11 19,023 07-18-2017, 10:39 AM
Last Post: tllim
  A case with active cooling for 1Gb pine64 ishwest 5 10,065 06-28-2017, 04:05 AM
Last Post: ishwest
  Lego Case Kiryu 67 89,148 03-30-2017, 11:36 AM
Last Post: Luke
  Official C4 Labs LCD Enclosure *UPDATED WITH ASSEMBLY VIDEO* Bluphire 12 24,923 01-06-2017, 03:15 AM
Last Post: Learnincurve
  Acrylic case with Lipo Holder and 2 Tactile push button included killor 9 13,064 10-24-2016, 08:18 AM
Last Post: killor
  Pine64 Layer case modmypi 2 5,318 10-04-2016, 02:45 AM
Last Post: modmypi

Forum Jump:


Users browsing this thread: 3 Guest(s)