1) Pine64+ - 201-A64DB110-02 A64-DB-V1.1 2G C1603068723 03.17
2) RTL chip numbers: RTL8211E G2X67H2 GG10b
3) current ethernet switch or router make model and numbers: Fritzbox 7490 (did not work with fixed 1000mbs port, only fixed 100mbs port), TP-Link TL-SG108 (does not work, showed 1000mbs connection, but very slow), D-LINK DIR-645 (does not work with 1000mbs port, very slow, only 100mbs port)
4) if you modded your board and made it work, how? n/a
5) if you swapped out your switch or router and made it work, what or which? see above, also tried different cable, all cat5e
6) if GbE is critical to your operation, please tell us how so ? wanted to replace Pi3 as network NAS, so with 100mbs its all the same again and no improvement
7) provide any other additional 'data only' that might be helpful. board worked fine in longsleeps environment, so seems an issue with my config/switches, but all other GbE components work fine...
2) RTL chip numbers: RTL8211E G2X67H2 GG10b
3) current ethernet switch or router make model and numbers: Fritzbox 7490 (did not work with fixed 1000mbs port, only fixed 100mbs port), TP-Link TL-SG108 (does not work, showed 1000mbs connection, but very slow), D-LINK DIR-645 (does not work with 1000mbs port, very slow, only 100mbs port)
4) if you modded your board and made it work, how? n/a
5) if you swapped out your switch or router and made it work, what or which? see above, also tried different cable, all cat5e
6) if GbE is critical to your operation, please tell us how so ? wanted to replace Pi3 as network NAS, so with 100mbs its all the same again and no improvement
7) provide any other additional 'data only' that might be helpful. board worked fine in longsleeps environment, so seems an issue with my config/switches, but all other GbE components work fine...
Still a linux newbie with several EEE-PCs, PI's, LattePanda and some Desktops/Laptops running Win10. Now also proudly using Pine64+ 2GB and gigabit LAN