hardware installation video tutorial
#1
Hi mates,

I need an help to understand how to connect the camera and LCD cable to the board connectors, is there any video tutorial?
How should i have to release the connector and then put in the flat cable?
Thank you in advance
Regards Smile Smile
  Reply
#2
hi, the connector on the PineA64 is very fragile and requies a significant finesse, as I think I've told you before, top3b.

BE CAREFUL

The trick is to lift up (gently using your finger-nail, no tools) on the black bar VERY carefully. Then tuck the end of the cable into the connector squarely with the contact pads down...

... then close the black bar, again being careful not to damage the bar, nor the cable, nor the pins !

All the connectors work the same way...


feel free to join us on chat at irc.pine64.xyz:6667 or ssl irc.pine64.xyz:6697


marcus
  Reply
#3
Mark,

Which is pin 1 on the board for the camera connection.  I see a "o" but it looks like a via.   Or maybe the android image shipped in the box (I got a 64 gb sd card from you guys) doesn't yet work with the camera?  The cable is well marked.
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Hardware-Bugs: No HDMI->DVI-Output / Crashes upon Ethernet Xyntec 3 2,403 04-02-2016, 09:42 AM
Last Post: DaveKram
  Few Hardware Questions dav3yb 3 2,623 03-20-2016, 11:06 AM
Last Post: tllim
  Hardware Source enoCeniP 27 14,145 02-27-2016, 01:11 PM
Last Post: tllim
  Hardware pins Tremoneck 8 5,911 02-17-2016, 06:23 AM
Last Post: tllim
  Hardware Decoding Tuxkey 3 2,931 01-27-2016, 03:09 PM
Last Post: tllim
  H.264 Video Encoding? bigmacattack 1 2,037 12-13-2015, 03:20 AM
Last Post: tllim

Forum Jump:


Users browsing this thread: 1 Guest(s)