Star64 Mechanicals
#1
I would like to put together a printable enclosure for the Star64 but cannot find mechanical dimensions for things like holes and connector placement.  Can anyone provide that kind of information?

Thanks
Mike
  Reply
#2
(05-15-2023, 11:13 AM)nbxmike Wrote: I would like to put together a printable enclosure for the Star64 but cannot find mechanical dimensions for things like holes and connector placement.  Can anyone provide that kind of information?

In case you weren't aware: https://wiki.pine64.org/wiki/STAR64#Boar...ifications

But a quick look didn't reveal that info, but it appears that several other "Model A" boards have the same outer dimensions:
https://wiki.pine64.org/wiki/Quartz64#Model_%22A%22
https://wiki.pine64.org/wiki/ROCKPro64#B...ifications

And especially the last one seems to have various schematics which may have or help you discover the dimensions/placements.
  Reply
#3
Has anybody found or made a case design yet?
I was thinking about taking a stab at adjusting one of the other "model A" board cases for the star64 connector layout.
  Reply
#4
(05-26-2023, 09:10 AM)ALBNC1974 Wrote: Has anybody found or made a case design yet?
I was thinking about taking a stab at adjusting one of the other "model A" board cases for the star64 connector layout.

Been a few months.  I’ve been busy playing with other devices, has anybody made a case design for the star64 yet?
  Reply
#5
There is a possibility that someone may have designed a case for the Star64. You can try searching online platforms like GitHub, Thingiverse, or other community forums where people share designs for 3D printing and custom case creation. Additionally, you can also check with the manufacturer or official community forums for any officially supported case options.
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Star64 distro overview October 2023 tantamount 6 1,097 02-13-2024, 10:56 PM
Last Post: segaloco
  [Star64] UART activity stopped yogo1212 0 113 02-11-2024, 04:34 PM
Last Post: yogo1212
  star64 bootable images, u-boot, sbi, forum? hexdump 2 1,269 12-06-2023, 09:47 PM
Last Post: faultyforelimb
  Armbian and AltLinux for Star64 (RISC-V) balbes150 28 5,247 11-24-2023, 06:26 AM
Last Post: balbes150
  [Article] Star64 JH7110: Experiments with OpenSBI (Supervisor Binary Interface) lupyuen 0 477 10-28-2023, 06:55 PM
Last Post: lupyuen
  [Article] Star64: Strange Workaround for TFTP Timeout in U-Boot Bootloader lupyuen 0 534 10-05-2023, 07:22 PM
Last Post: lupyuen
  star64-image-minimal-star64-2.1 & X fonts tantamount 0 474 10-02-2023, 07:02 PM
Last Post: tantamount
  [Article] Star64 JH7110: Power Up the Display Controller with U-Boot Bootloader lupyuen 0 592 09-02-2023, 10:13 AM
Last Post: lupyuen
  [Article] RISC-V Star64 JH7110: Inside the Display Controller lupyuen 2 813 08-23-2023, 05:08 PM
Last Post: lupyuen
  Cannot Boot Star64 jdoolin 5 1,180 08-20-2023, 06:43 AM
Last Post: balbes150

Forum Jump:


Users browsing this thread: 1 Guest(s)