New PinePhone died after first WiFi setup
03-04-2022, 06:57 AM
(03-04-2022, 03:22 AM)phero Wrote:(03-03-2022, 03:29 PM)fxc Wrote: JumpDrive is not compatible with the Pro. For the Pro the drained battery boot loop is a known issue, simply follow the information in the blue info box: https://wiki.pine64.org/wiki/PinePhone_P...structions
Thanks for the tip! I followed the instructions and indeed when using lsusb the line appears:
Bus 001 Device 050: ID 2207:330c Fuzhou Rockchip Electronics Company RK3399 in Mask ROM mode
I'll let it stay connected for 4 or 5 hours and see what happens.
'
Thanks again!
That's a very good sign and telling us that the phone is working as expected. You can unplug the phone from USB for a good minute or two and replug it again and then check "lsusb" again. If it disappeared from "lsusb" after replugging it was indeed discharged. If it is still showing Maskrom mode then your installation is fully corrupted and the battery is charged just fine. In the latter case you simply need to flash a microSD card and boot from that (using the RE button method).
