Broken pinecil (?)
#1
Hi,
Is there any way to fix a pinecil that does not turn at all? If i plug it in my pc (via dmesg) i get this:

[  111.031189] usb 1-3: new full-speed USB device number 8 using xhci_hcd
[  111.175239] usb 1-3: device descriptor read/64, error -71
[  111.394259] usb 1-3: device descriptor read/64, error -71
[  111.619272] usb 1-3: new full-speed USB device number 9 using xhci_hcd
[  111.763250] usb 1-3: device descriptor read/64, error -71
[  111.986842] usb 1-3: device descriptor read/64, error -71
[  112.096540] usb usb1-port3: attempt power cycle


I hope yes because it tooks 28 days to get to my country.
  Reply
#2
Your computer's USB doesn't have enough power to run the Pinecil. You need either need a USB type C: PD and QC 3.0 12V-20V 3A power supply or a Barrel Jack: DC5525, 12V-21V DC 3A. Anything less than that and it's designed not to turn on.
  Reply
#3
(02-15-2022, 02:36 PM)sergio.pantalone Wrote: Your computer's USB doesn't have enough power to run the Pinecil. You need either need a USB type C: PD and QC 3.0 12V-20V 3A power supply or a Barrel Jack: DC5525, 12V-21V DC 3A. Anything less than that and it's designed not to turn on.

Yes, first thing I plug it with my QC charger ( I always used that with my previous pinecil) but nothing. I tried to plug it to my computer and (also in DFU) I get those error and with my previous pinecil it always worked for firmware updates.
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Pinecil 24V mod alex_grach 0 596 02-22-2022, 05:10 AM
Last Post: alex_grach
  Idea: Pinecil wood burning tip (pyrography)? ijsbeer 4 1,749 10-29-2021, 03:58 AM
Last Post: Fred Zyphal

Forum Jump:


Users browsing this thread: 1 Guest(s)