+- PINE64 (https://forum.pine64.org)
+-- Forum: Pinecil (https://forum.pine64.org/forumdisplay.php?fid=162)
+--- Forum: Pinecil Hardware and Accessories (https://forum.pine64.org/forumdisplay.php?fid=165)
+--- Thread: Broken pinecil (?) (/showthread.php?tid=16099)
Broken pinecil (?) - sh4ttered - 02-15-2022
Hi,
Is there any way to fix a pinecil that does not turn at all? If i plug it in my pc (via dmesg) i get this:
[ 111.031189] usb 1-3: new full-speed USB device number 8 using xhci_hcd
[ 111.175239] usb 1-3: device descriptor read/64, error -71
[ 111.394259] usb 1-3: device descriptor read/64, error -71
[ 111.619272] usb 1-3: new full-speed USB device number 9 using xhci_hcd
[ 111.763250] usb 1-3: device descriptor read/64, error -71
[ 111.986842] usb 1-3: device descriptor read/64, error -71
[ 112.096540] usb usb1-port3: attempt power cycle
I hope yes because it tooks 28 days to get to my country.
RE: Broken pinecil (?) - sergio.pantalone - 02-15-2022
Your computer's USB doesn't have enough power to run the Pinecil. You need either need a USB type C: PD and QC 3.0 12V-20V 3A power supply or a Barrel Jack: DC5525, 12V-21V DC 3A. Anything less than that and it's designed not to turn on.
RE: Broken pinecil (?) - sh4ttered - 02-16-2022
(02-15-2022, 02:36 PM)sergio.pantalone Wrote: Your computer's USB doesn't have enough power to run the Pinecil. You need either need a USB type C: PD and QC 3.0 12V-20V 3A power supply or a Barrel Jack: DC5525, 12V-21V DC 3A. Anything less than that and it's designed not to turn on.
Yes, first thing I plug it with my QC charger ( I always used that with my previous pinecil) but nothing. I tried to plug it to my computer and (also in DFU) I get those error and with my previous pinecil it always worked for firmware updates.