Broken pinecil (?)

[sh4ttered]

Hi,
Is there any way to fix a pinecil that does not turn at all? If i plug it in my pc (via dmesg) i get this:

[  111.031189] usb 1-3: new full-speed USB device number 8 using xhci_hcd
[  111.175239] usb 1-3: device descriptor read/64, error -71
[  111.394259] usb 1-3: device descriptor read/64, error -71
[  111.619272] usb 1-3: new full-speed USB device number 9 using xhci_hcd
[  111.763250] usb 1-3: device descriptor read/64, error -71
[  111.986842] usb 1-3: device descriptor read/64, error -71
[  112.096540] usb usb1-port3: attempt power cycle

I hope yes because it tooks 28 days to get to my country.

[sergio.pantalone]

Your computer's USB doesn't have enough power to run the Pinecil. You need either need a USB type C: PD and QC 3.0 12V-20V 3A power supply or a Barrel Jack: DC5525, 12V-21V DC 3A. Anything less than that and it's designed not to turn on.

[sh4ttered]

Your computer's USB doesn't have enough power to run the Pinecil. You need either need a USB type C: PD and QC 3.0 12V-20V 3A power supply or a Barrel Jack: DC5525, 12V-21V DC 3A. Anything less than that and it's designed not to turn on.

Yes, first thing I plug it with my QC charger ( I always used that with my previous pinecil) but nothing. I tried to plug it to my computer and (also in DFU) I get those error and with my previous pinecil it always worked for firmware updates.