First boot - no fan, no display... is it broken?
#1
Hi,

I just received my Rockpro64, I plugged the fan in, and then added the SATA adapter and some drives, plugged in the HDMI, made an armbian sdcard according to the instructions, and then plugged in the board with the power supply I ordered from Pine64.

I can hear the drives spin up, I see a little green light, but nothing else. The fan doesn't spin (is it supposed to?) I get nothing on the HDMI display.

What can I do to debug what is going on here?

Thanks!
  Reply
#2
An update to my issue.... it seems the problem was the wrong image was used to burn onto the SDcard. I had expected some kind of POST or something to suggest that things were functioning, but that is not the case. Once I burned the right image, things were able to boot.
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Installation Debian on emmc: which U-Boot and where? vongillus 3 184 07-02-2022, 09:24 AM
Last Post: dkebler
  enble boot after power loss/restore dkebler 11 985 06-22-2022, 09:39 PM
Last Post: dkebler
  ROCKPRO64 PCI SSD SD-boot Install pspgarret 0 91 06-09-2022, 10:56 AM
Last Post: pspgarret
  RockPro64 has no white led, nor will it boot past... AnjinMeili 2 156 05-31-2022, 09:19 AM
Last Post: Rocklobster
  no boot white led flashing moserwi 3 554 03-28-2022, 07:26 PM
Last Post: Rocklobster
  Cannot get my board to boot deutschlmao 10 1,505 03-19-2022, 07:45 PM
Last Post: Rocklobster
  Enabling secure boot arturkow 4 1,120 11-25-2021, 04:57 AM
Last Post: arturkow
  Device unable to boot Lunix33 9 3,751 09-23-2021, 01:38 AM
Last Post: LMM
  Flashed SPI, able to ping RP64 but not boot from sdcard/usb korefuji 2 1,420 08-26-2021, 11:41 AM
Last Post: LMM
  Mainline U-Boot with SPI, NVMe and SATA boot support sigmaris 103 65,680 07-08-2021, 04:55 PM
Last Post: Mentaluproar

Forum Jump:


Users browsing this thread: 1 Guest(s)