04-25-2021, 01:01 PM
(This post was last modified: 04-25-2021, 01:19 PM by Gribouille.)
(04-22-2021, 02:41 PM)fdlamotte Wrote: (04-22-2021, 11:09 AM)Gribouille Wrote: Yes, the automatic rotation is enable, but in landscape mode, the keyboard's size is smaller than in portrait mode :-(
But, the developers are on the good road and the automatic rotation is very useful 
you should try my keyboard in landscape  I've try your files in portrait and landscape mode
I've begin to modify the file associated to the portrait mode for my usage. First modification, I've replaced '@' by '~' in 'fr.yaml', now I must try with the wide version of your keyboard.
About the wide version in landscape mode, it is a very wide keyboard Just a little big to use it with vim in a console, but I'm going to look at the YAM file to adapt the size.
Very good files and easy to understand.
I've noticed that for the 'SMS' or 'Editor' applications, the '~' was changed to '@' like in the original file, but for 'King's Cross' and 'Terminal' it's '~'. How configure the keyboard's layout for each application, can you explain ?
Thank you !
(04-25-2021, 01:01 PM)Gribouille Wrote: (04-22-2021, 02:41 PM)fdlamotte Wrote: (04-22-2021, 11:09 AM)Gribouille Wrote: Yes, the automatic rotation is enable, but in landscape mode, the keyboard's size is smaller than in portrait mode :-(
But, the developers are on the good road and the automatic rotation is very useful
you should try my keyboard in landscape I've try your files in portrait and landscape mode
I've begin to modify the file associated to the portrait mode for my usage. First modification, I've replaced '@' by '~' in 'fr.yaml', now I must try with the wide version of your keyboard.
About the wide version in landscape mode, it is a very wide keyboard Just a little big to use it with vim in a console, but I'm going to look at the YAM file to adapt the size.
Very good files and easy to understand.
I've noticed that for the 'SMS' or 'Editor' applications, the '~' was changed to '@' like in the original file, but for 'King's Cross' and 'Terminal' it's '~'. How configure the keyboard's layout for each application, can you explain ?
Thank you ! Thank you for the feedback, I'm happy you consider it to base your work upon
I think you must have two distinct layout. fr.yaml and terminal/fr.yaml ... the second one is the terminal keyboard and the first, the default one. I, too use the same keyboard for both ...
And to test your layout, simply switch between portrait and landscape, squeekboard will reload the keyboard ...
- SMS and Calls : two day ago, someone call me and had let a vocal message, but no alert on the Pinephone. Today, fives calls, five vocal messages but no alert. Test of the application 'SMS' with a friend, the SMS is received, the phone display the numerical keyboard to unlock the phone and nothing else, no vibration, no sound.
Hello,
Since few days, when the phone stay in standby, the modem disappear. Even a shutdown or a reboot has no effect.
Software bug ? Hardware problem ?
An idea ?
Hello,
Small graphic bugs : the size of the screen is not good.
If I send a SMS to a new contact, the arrow to send the SMS is not visible. I can see it when I switch in landscape mode. Same thing for the 'Parameters' application in some case.
When I reply by SMS to a discussion, there is no problem to send the message, the arrow is visible.
A bad day yesterday for my PinePhone : small drop on the parquet floor. No visible defect, the glass is not broken. But now, I'm not able to give my passphrase to unlock the PinePhone. All vertical line corresponding to the '3' is not responsive 
(07-05-2021, 12:29 AM)Gribouille Wrote: A bad day yesterday for my PinePhone : small drop on the parquet floor. No visible defect, the glass is not broken. But now, I'm not able to give my passphrase to unlock the PinePhone. All vertical line corresponding to the '3' is not responsive so sorry to hear! Did it land on the face or the back? From personal experience, I think the Pinephone is pretty hardy. Just a few months after receiving mine it slid down the dashboard landing on its face. (it was facing down and the glass got slippery) In addition to 3 medium long cracks, the top had some crushed particles that was shedding. The phone itself seemed to work still. Too chicken to try and replace the screen I first put some scotch tape over the crushed glass part so it wouldn't be shedding and cutting my finger, and then I ordered the screen protector, placed it upside down covering the top, letting the long U be at the bottom. It still works! I confess, yesterday, it was dropped again. It didn't seem to affect the operations.
Have you reseat the back cover, squeeze all surfaces to make sure everything is in place?
Good luck! Hope it start to work again!
(07-05-2021, 07:47 PM)HLing Wrote: (07-05-2021, 12:29 AM)Gribouille Wrote: A bad day yesterday for my PinePhone : small drop on the parquet floor. No visible defect, the glass is not broken. But now, I'm not able to give my passphrase to unlock the PinePhone. All vertical line corresponding to the '3' is not responsive so sorry to hear! Did it land on the face or the back? From personal experience, I think the Pinephone is pretty hardy. Just a few months after receiving mine it slid down the dashboard landing on its face. (it was facing down and the glass got slippery) In addition to 3 medium long cracks, the top had some crushed particles that was shedding. The phone itself seemed to work still. Too chicken to try and replace the screen I first put some scotch tape over the crushed glass part so it wouldn't be shedding and cutting my finger, and then I ordered the screen protector, placed it upside down covering the top, letting the long U be at the bottom. It still works! I confess, yesterday, it was dropped again. It didn't seem to affect the operations.
Have you reseat the back cover, squeeze all surfaces to make sure everything is in place?
Good luck! Hope it start to work again!
Thank you for your encouragement. But ... nothing good to say today.
You can read the full story here : https://forum.pine64.org/showthread.php?...0#pid97250
When I see the improvements of the Mobian, I'm sad, because since more than 1 month, my PinePhone is always unusable because of the 'delamination' problem : https://forum.pine64.org/showthread.php?...3#pid99283
I can't obtain some help from the support, even in the forum.
|
