Hey guys, i just tried to insert a sd card into my pinephone and it started smoking. For real. There was a smell of burning plastic and the card was hot like a hell. I imeddiaetly removed the battery, tried to power on the phone again and it booted up and worked just fine. then i tried to insert another sd card and it worked fine as well. Disks utility detected it normally and was able to read all the partitions correctly. The question is: what did just happen? This card was 100% operational, I used it a lot with my PBP with no problem. I reckon that card is dead now, but i am glad that my pinephone is undamaged. What could have sparked such a violent reaction and what should I do to prevent similar accidents in the future?
Time to pull the phone apart and get the voltmeter checking for shorts. You're likely looking for something that shorts a voltage line down to ground.
Bare in mind also that just because the smoke came from the SD card slot doesn't mean that it originated from there. Check for some form of burn or plastic warp.
the funniest thing is that both card reader and sd card seem to be functional. at least reader managed to read another sd card without setting it on fire, and the first sd card is readable by another card reader. i will dissassemble my pinephone and check for any defects ASAP. Not sure how could they survive such an accident without damage
Glad to hear!
Hopefully you are able to get to the bottom of this. Probably worth documenting exactly what happened to release smoke so that the whole community and future devices can potentially benefit.