|
Wifi not working
|
09-02-2020, 09:41 AM
I just received my Postmarket Edition of the PinePhone. Got it all setup everything was working great but the wifi stopped working.
When I try to reload the wifi kernel module I'm seeing this error in dmesg. Any insight to what might be going on here?
09-02-2020, 10:12 AM
(09-02-2020, 09:41 AM)dbrandon Wrote: I just received my Postmarket Edition of the PinePhone. Got it all setup everything was working great but the wifi stopped working. I also want to make sure it is clear I removed the sticker blocking the battery contacts.
09-02-2020, 11:04 AM
I do not see the message attached to your post. But if you could give me a little more detail on how to entered this state and discovered an issue with wifi I am interested in trying to recreate your issue.
Here is a doc that I use when trying to write up steps for others. Let me know stuff like timeline.
09-02-2020, 11:27 AM
(09-02-2020, 11:04 AM)plainenough Wrote: I do not see the message attached to your post. But if you could give me a little more detail on how to entered this state and discovered an issue with wifi I am interested in trying to recreate your issue.I didn't add the error message from dmesg ```rtl8723cs: probe of mmc1:0001:1 failed with error -110``` I just rebooted the phone and now the device isn't showing up. There isn't a clear path to reproduce.
09-02-2020, 03:32 PM
I'm going to guess that this is a timeout while initializing the driver.
Here are my thoughts. https://www-numi.fnal.gov/offline_softwa...rrors.html https://github.com/ayufan-pine64/rtl8723cs Looks like you are timing out, I would bet it is related to something in the suspend functionality. Does wifi work after reboot?
09-02-2020, 04:04 PM
(09-02-2020, 03:32 PM)plainenough Wrote: I'm going to guess that this is a timeout while initializing the driver.It doesn't work after a reboot.
09-02-2020, 10:01 PM
I did notice in my wifi menu that it said something like "wifi adapter not found" My solution was to tap the switch at the top of the screen to turn Wifi on.
I know this solution won't help everybody; but at first I didn't find the UI to be the clearest so I hope this may help someone.
09-03-2020, 01:48 PM
I let the battery get below 20% on the device and it has been stuck at 16% plugged in for several hours. Based on other posts, the wifi must not be working because of a bad battery. I'm not sure since I don't have a second battery to test that hypothesis.
09-10-2020, 11:17 AM
The wifi chip uses some power directly from the battery, so if the battery level is too low or there's no battery inserted the chip won't start causing this error.
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
| PostmarketOS v22.06 Plasma Mobile on PinePhone Pro & WiFi Connect to SSID | X0X0X0X0X0 | 3 | 1,753 |
11-18-2024, 02:23 AM Last Post: linmob |
|
| Physical keyboard symbols not working again | vgnmnky | 3 | 3,247 |
10-28-2022, 12:56 AM Last Post: theResonant |
|
|
No connection to internet without wifi :/ | elode | 3 | 3,231 |
03-16-2022, 04:15 PM Last Post: bcnaz |
| Wifi and bluetooth disabled after upgrading to PMOS kernel 5.9.1 | aithal | 0 | 2,289 |
11-09-2020, 01:17 AM Last Post: aithal |
|
| Working Mailprogram with IMAP | pine_sw | 6 | 8,362 |
10-06-2020, 02:02 AM Last Post: hiimtye |
|
| Online account (google) not working | RodMyers | 6 | 9,611 |
09-18-2020, 03:58 AM Last Post: mactoni |
|
|
|
WiFi looks to be working, but ... | vidarr | 2 | 3,819 |
09-08-2020, 04:21 PM Last Post: vidarr |
| Angelfish on Plasma Mobile not working | fernando_c_m | 4 | 6,783 |
09-06-2020, 10:31 PM Last Post: bcnaz |
|
| Is it possible to pre-configure wifi and ssh with pmbootstrap? | kelbot | 2 | 5,317 |
07-06-2020, 01:55 AM Last Post: ChriChri |
|
