PINE64   ›   General   ›   Getting Started   ›   Switch found in the box

Thread Closed 
Switch found in the box
pine.tree
Auxiliary Assistant
****
Joined: Jan 2016
Posts: 181

Reputation: 33
#31
04-19-2016, 10:32 AM
I'd like to hear from someone who didn't want the switch on the Pine. That's the reason the switches weren't pre-soldered.
If I've helped you with something, please leave a rating for my responses.
  Website
tkaiser
Pine Scholar
****
Joined: Dec 2015
Posts: 450

Reputation: 51
#32
04-19-2016, 10:35 AM
(04-19-2016, 10:10 AM)CaptainZalo Wrote: I'll rather attach some pins

Why? Both switches and led functionality is available on the EXP connector. There's no need to attach anything else than wires.
Armbian for Pine64+ | Pine64 in linux-sunxi wiki
CaptainZalo
Pine Scholar
****
Joined: Apr 2016
Posts: 164

Reputation: 20
#33
04-19-2016, 12:00 PM
(04-19-2016, 10:35 AM)tkaiser Wrote:
(04-19-2016, 10:10 AM)CaptainZalo Wrote: I'll rather attach some pins

Why? Both switches and led functionality is available on the EXP connector. There's no need to attach anything else than wires.

I seriously need to read up on all the connections on the Pine. You've just made part of my day. Smile
grimmwerks
Pine Initiate
**
Joined: Apr 2016
Posts: 1

Reputation: 0
#34
04-19-2016, 07:48 PM
Got my Pine today - the Pine was in a bag, in a box, in an envelope, sealed.  There was also what seems to be a small button -- for rebooting?  How and where do I attach it to the board?
pine.tree
Auxiliary Assistant
****
Joined: Jan 2016
Posts: 181

Reputation: 33
#35
04-20-2016, 08:55 AM
It can be used as a power switch, or as a reset switch. You can put the switch into the four-hole pattern found below the USB ports in this image: http://wiki.pine64.org/images/7/7d/Pine6...nector.png

You don't have to solder the switch onto the board, you can just bend the switch connectors inside the holes. Soldering would guarantee a good connection though.
If I've helped you with something, please leave a rating for my responses.
  Website
macoco
Pine Initiate
**
Joined: Apr 2016
Posts: 2

Reputation: 0
#36
04-20-2016, 11:57 AM
(04-03-2016, 02:10 PM)pine.adam Wrote: I received my pine the other day. 2gb version.

There was a little button floating loose in the box along with the pine board.

Did anyone else get the same thing?

If so, what should I do with it. I am assuming it is some sort of add on power button.

Thanks,
Adam

Mine was loose outside the box in the mailer.
psychedup
Pine Scholar
****
Joined: Jan 2016
Posts: 107

Reputation: 16
#37
04-21-2016, 09:01 AM
I had a dream about that little power button the other night...
Ghost
Messenger
*****
Moderators
Joined: Jan 2016
Posts: 742

Reputation: 72
#38
04-21-2016, 09:41 AM
(04-21-2016, 09:01 AM)psychedup Wrote: I had a dream about that little power button the other night...

Was it about diving into a sea of teeny tiny tact switches? I have had that dream, my friend...

Or maybe you took the switch out for dinner then dancing? I have had that dream too...

Hopefully it's not a nightmare...... Confused
psychedup
Pine Scholar
****
Joined: Jan 2016
Posts: 107

Reputation: 16
#39
04-21-2016, 03:55 PM
I'm still waiting for my pine64's to ship, but I have received a couple of things from Amazon this week in padded envelopes. The other night I woke up in a panic because that button might still be in the envelope!
inactivist
Pine Initiate
**
Joined: Apr 2016
Posts: 4

Reputation: 0
#40
04-23-2016, 10:21 PM
Mine was loose in the mailing container.  Freaked out a bit when I saw it =)
Thread Closed 


Possibly Related Threads…
Thread Author Replies Views Last Post
  Power Switch for Pine64 512MB Board MonarchOfLight 0 2,755 10-24-2016, 04:33 PM
Last Post: MonarchOfLight
  Script Not Found error using PhoenixCard Ghost 4 22,208 07-16-2016, 08:01 PM
Last Post: Ghost

Forum Jump:


Users browsing this thread: 1 Guest(s)