PINE64   ›   PINE A64(+)   ›   Android on Pine A64(+)   ›   Battery Issues - Nothing Else Works

Thread Closed 
Battery Issues - Nothing Else Works
mesaxi
Pine Adept
***
Joined: May 2016
Posts: 35

Reputation: 3
#1
07-24-2017, 10:00 AM (This post was last modified: 07-24-2017, 10:39 AM by mesaxi.)
I bought a battery and installed it on my pine, but when the board isn't plugged directly into the USB Charger nothing but the most basic board functions work. Anything in the USB slot is not read, there is no audio output from the 3.5mm jack, there is no HDMI output. Is there something wrong with my board or maybe the OS, or is it so limited that my battery purchase was a total waste? I mean between this and not being able to turn the board on/off I'm about ready to ditch it and get a Raspberry Pi, which is a shame because I've wasted a lot of money at this point.

edit: I should mention I'm using the Android 5.1 LCD build, in case that's the issue. Bluetooth and WiFi do still work while on battery.
pfeerick
Moderator
*****
Moderators
Joined: May 2016
Posts: 1,361

Reputation: 118
#2
07-24-2017, 08:02 PM
I'm not sure what is going on with the sound and HDMI, but unless you have a 512MB board (which I would think not since you're running Android), you will have a jumper near the MicroSD card slow that is labelled BAT / DC_IN. Try moving it from the DC_IN position to the BAT position... then your USB ports should work. 

Is it an official battery/holder, or one you've added on yourself? And if it's not official, how did you 'install' it? Just wondering if it has the proper three/wire interface so that the on-board power management knows to charge the battery Wink
pine64 wiki, linux-sunxi Pine64 wiki, the board/connector layout & pinout of the Raspberry Pi/Euler/EXP connectors
mesaxi
Pine Adept
***
Joined: May 2016
Posts: 35

Reputation: 3
#3
07-25-2017, 02:08 PM
(07-24-2017, 08:02 PM)pfeerick Wrote: I'm not sure what is going on with the sound and HDMI, but unless you have a 512MB board (which I would think not since you're running Android), you will have a jumper near the MicroSD card slow that is labelled BAT / DC_IN. Try moving it from the DC_IN position to the BAT position... then your USB ports should work. 

Is it an official battery/holder, or one you've added on yourself? And if it's not official, how did you 'install' it? Just wondering if it has the proper three/wire interface so that the on-board power management knows to charge the battery Wink

It's the official Pine battery and a 2GB board. I currently have it in a pretty tight case so I'll have to take it out to check the jumper you mentioned, will report back. Thanks for the suggestion
mesaxi
Pine Adept
***
Joined: May 2016
Posts: 35

Reputation: 3
#4
07-25-2017, 06:53 PM
Sure enough it was the jumper, fixed everything. Thanks!
Thread Closed 


Possibly Related Threads…
Thread Author Replies Views Last Post
  Issues with SD Card and Running Android Twistedx 0 3,873 02-26-2019, 11:58 AM
Last Post: Twistedx
  Youtube TV experience/ screen resolution issues gubaguba 0 2,214 02-22-2018, 09:12 AM
Last Post: gubaguba
  Xposed works! More or less. How To: Manually install Xposed Framework hyperlogos 6 18,028 10-21-2016, 08:11 AM
Last Post: webterminator77
  Android Issues; 4K, Ethernet, Plex kikootwo 6 8,690 07-10-2016, 12:23 AM
Last Post: yusijs
  App compatibility issues with pine64 Boring 3 5,355 07-06-2016, 02:36 PM
Last Post: Tarjei85
  Android + battery dulasu 2 4,103 06-22-2016, 03:25 AM
Last Post: pfeerick
  Andoid issues waterboy 6 9,681 04-27-2016, 05:13 PM
Last Post: waterboy

Forum Jump:


Users browsing this thread: 1 Guest(s)