Design custom board

[behnam_sh]

Hi every body
Does any one designed any custom board based on the PINE64 schematic so far? any source to buy RK3368?

Thank you

[MarkHaysHarris777]

Does any one designed any custom board based on the PINE64 schematic so far? any source to buy RK3368?

I'm not sure of your intent;  I approved this thread temporarily.  This topic may not be appropriate for the forum, which is designed to discuss Pine Inc products and services-- not to discuss building clones or competitive products.  We'll see where this goes for the moment, but I may lock the thread depending.

marcus

[pfeerick]

Hi every body
Does any one designed any custom board based on the PINE64 schematic so far? any source to buy RK3368?

Thank you

I think you might be getting your wires crossed a bit... pine64 and RK3368? pine64 has a Allwinner A64 processor, and the rock64 has a RK3368 processor

The rock64 has only just been announced, so I don't think any derivative designs will be surfacing any time soon As far as the pine64 space, a couple of people have been working on boards using the SoPine compute module, so there is that. 

I hope you are able to talk more about any projects you have in mind... this is what open source hardware and designs are all about!

[dkryder]

documentation is at following link, use resources tab.
https://www.pine64.org/?page_id=7175

[xalius]

Actually Rock64 has RK3328, not RK3368!

[behnam_sh]

Thank you for your replies
Yes, I mean Rock64, sorry for my mistake. So then, can I trust on the schematic in my design?
and still another question, where can I by the RK3368 chip?

[xalius]

As I said above, Rock64 uses RK3328, NOT RK3368! As far as schematics go, there are reference designs from Rockchip you can use (http://opensource.rock-chips.com/images/...erence.zip) and for sourcing actual chips, you have to contact RK directly...