+- PINE64 (https://forum.pine64.org)
+-- Forum: PINE A64(+) (https://forum.pine64.org/forumdisplay.php?fid=4)
+--- Forum: Pine A64 Hardware, Accessories and POT (https://forum.pine64.org/forumdisplay.php?fid=32)
+--- Thread: Design custom board (/showthread.php?tid=4717)
Design custom board - behnam_sh - 07-08-2017
Hi every body
Does any one designed any custom board based on the PINE64 schematic so far? any source to buy RK3368?
Thank you
RE: Design custom board - MarkHaysHarris777 - 07-09-2017
(07-08-2017, 11:59 PM)behnam_sh Wrote: Does any one designed any custom board based on the PINE64 schematic so far? any source to buy RK3368?
I'm not sure of your intent; I approved this thread temporarily. This topic may not be appropriate for the forum, which is designed to discuss Pine Inc products and services-- not to discuss building clones or competitive products. We'll see where this goes for the moment, but I may lock the thread depending.
marcus
RE: Design custom board - pfeerick - 07-09-2017
(07-08-2017, 11:59 PM)behnam_sh Wrote: Hi every body
Does any one designed any custom board based on the PINE64 schematic so far? any source to buy RK3368?
Thank you
I think you might be getting your wires crossed a bit... pine64 and RK3368? pine64 has a Allwinner A64 processor, and the rock64 has a RK3368 processor
The rock64 has only just been announced, so I don't think any derivative designs will be surfacing any time soon
As far as the pine64 space, a couple of people have been working on boards using the SoPine compute module, so there is that. I hope you are able to talk more about any projects you have in mind... this is what open source hardware and designs are all about!
RE: Design custom board - dkryder - 07-10-2017
documentation is at following link, use resources tab.
https://www.pine64.org/?page_id=7175
RE: Design custom board - xalius - 07-10-2017
Actually Rock64 has RK3328, not RK3368!
RE: Design custom board - behnam_sh - 07-11-2017
Thank you for your replies
Yes, I mean Rock64, sorry for my mistake. So then, can I trust on the schematic in my design?
and still another question, where can I by the RK3368 chip?
RE: Design custom board - xalius - 07-11-2017
As I said above, Rock64 uses RK3328, NOT RK3368! As far as schematics go, there are reference designs from Rockchip you can use (http://opensource.rock-chips.com/images/0/09/Rk3328_hardware_reference.zip) and for sourcing actual chips, you have to contact RK directly...