Running Out Of Options LCD Panel Just Not Working

[AUDIOTEK]

32Gb micro SD with the following on it
android-ver5.1.1-20160711-pine64-phoenixCard

No errors when I burned it with ApplePi Baker

Both ribbon cables are connected in their appropriate sockets

Thin one goes to TP (pads down)
Larger one with 2 blue ends in DSI (pads down)
and to the ribbon cable connector.  I even flipped the connector just in case.

MicroSD is a Adata class10 64GB

Power supply is the one that came with the Pine64.

When I plug the power in I see a little bleep on the panel but that's it.   Is there a LED on the panel itself to see if there's connection?

Also the Pine works fine with Adroid 5.1 and HDMI 

Anybody can think of anything?

I'm running out of options.

   

   

   

[AUDIOTEK]

OK I got it. 2 things if you start with ApplPi Baker stay with ApplePi Baker. I formated my micro SD using SD Formatter and burned the image with ApplePi Baker.

Second thing is power issue I cannot use the screen and the WiFi module together!!!

I guess I'm gonna have to bump up the Amps on that power supply they sent me.

[Ghost]

OK I got it.  2 things if you start with ApplPi Baker stay with ApplePi Baker.  I formated my micro SD using SD Formatter and burned the image with ApplePi Baker.

Second thing is power issue   I cannot use the screen and the WiFi module together!!!

I guess I'm gonna have to bump up the Amps on that power supply they sent me.

Also, the LCD panel uses a different Android OS image than the HDMI version. Find it here.

[Pineplayer]

Second thing is power issue   I cannot use the screen and the WiFi module together!!!

I guess I'm gonna have to bump up the Amps on that power supply they sent me.

I have had the LCD and touchscreen working with also the wifi module plugged in and connected to the network, all while using the Pine64 power supply.
Are you sure you're using the right image, as Ghost suggested?

[AUDIOTEK]

I finally got it to work with the module after a few reboot.