bes2600 driver
#61
(10-12-2025, 02:07 AM)biketool Wrote: There are threads here and guides online on how to configure and install the bes2600 driver; as far as I know it is still not officially included because of the license confusion.

The firmware is already included in mobian repository, no need to compile it myself. I installed it. Is there something still missing to get internal WiFi working?
  Reply
#62
(10-12-2025, 02:20 AM)alpopa Wrote:
(10-12-2025, 02:07 AM)biketool Wrote: There are threads here and guides online on how to configure and install the bes2600 driver; as far as I know it is still not officially included because of the license confusion.

The firmware is already included in mobian repository, no need to compile it myself. I installed it. Is there something still missing to get internal WiFi working?

That is good news then as around six months ago I thought the project had completely rejected the firmware over licensing and had closed the issue.
Ido not have the time to play with my tablet so I am using the stock Arch-ish OS as I need the tablet working but Iave you seen any progress with cameras or bluetooth?
I feel like I need to have a complete guide including the wifi if I were to change to Mobian as I prefer, for now though until there is something like that in the wiki I will stick to stock.
  Reply
#63
The firmware and the kernel driver are two different things. You need both to have working WiFi.
  Reply
#64
(10-12-2025, 02:18 PM)Kevin Kofler Wrote: The firmware and the kernel driver are two different things. You need both to have working WiFi.

To clarify that even in the old PCMCIA era everything post Orinoco card time period almost to all WiFi devices need a firmware to be uploaded at wifi chip bootup, the firmware is an accursed binary blob and probably has to be that way to meet FCC rules as it sets the limits of the protocol including what channels can be used in different countries etc.  The driver package will have the firmware and upload it at the boot time.  Both the driver and firmware need to have a license permitting their use in a free(as in beer) OS but those black-box blobs do keep the system from being fully FOSS.  One way we see WiFi modularization is via an ESP32 board which has it's own OS and it handles uploading firmware and gives the user some mode and AP selection tools and a simple dumb data line to a black boxed modem like device.



I wish there was some sort of firmware hacking community similar to the libreboot community but I know of none.  Current consumer and community software defined radio is in no way able to replicate the nearly miraculous  bandwidth we get from the wifi protocol on ISM bands.
  Reply


Forum Jump:


Users browsing this thread: 3 Guest(s)