Battery Power
#1
I have 5 Pine64+ 2G models I just received today.  I am planning to build a Wimpy Cluster and starting with 5 to prototype the idea.

The inspiration came from this paper:

http://coen.boisestate.edu/ece/files/201...ter_v2.pdf

In his paper, he created a custom PCB to both power the board from the 5V input and twidle with an LED.

In my setup, I am planning to use the battery input from a standard PC Power supply instead to simplify cabling (and I see the jumper on the board to switch to battery).

The main question I have is do I need to add a ploy (or other) fuse (as he describes) to protect from short circuits?

Also, I cannot think of any reason, but I would not expect a performance decrease just because I am on battery power?

And no, I am not an EE.

Thanks,
-henry
  Reply
#2
(06-11-2016, 10:55 PM)clackamas Wrote: I have 5 Pine64+ 2G models I just received today.  I am planning to build a Wimpy Cluster and starting with 5 to prototype the idea.

The inspiration came from this paper:

http://coen.boisestate.edu/ece/files/201...ter_v2.pdf

In his paper, he created a custom PCB to both power the board from the 5V input and twidle with an LED.

In my setup, I am planning to use the battery input from a standard PC Power supply instead to simplify cabling (and I see the jumper on the board to switch to battery).

The main question I have is do I need to add a ploy (or other) fuse (as he describes) to protect from short circuits?

Also, I cannot think of any reason, but I would not expect a performance decrease just because I am on battery power?

And no, I am not an EE.

Thanks,
-henry
Battery power will not decrease the board performance. The poly fuse is for cautious measure and considers a good option.
  Reply
#3
(06-11-2016, 10:55 PM)clackamas Wrote: The main question I have is do I need to add a ploy (or other) fuse (as he describes) to protect from short circuits?
Hi Henry,
Since you're using multiple pine64 boards in an array, I would be tempted to put standard glass fuses inline with the power supply line into each pine64. A polyfuse is good as it self-resets, but that can also hide a problem, unless you know that the device has triggered the fuse and why. Plain glass fuses are cheap, and if you were to put 1.5/2A fuses on each pine64, I don't see why they would blow those fuses unless something went wrong (as I have yet to see a properly working pine64 need more than 800ma @ 5v for just the main board+wifi, without the LCD or peripherals on the USB). 
At an absolute minimum, you would want a single fuse between the power supply and the cluster, rated at just more than what you expect the maximum power from the cluster to be (for 5 pines, a fuse between 7.5A -10A would do), so the power supply doesn't get overloaded (although modern computer power supplies do have good self-protection circuitry in them, and generally shut down if anything goes wrong, but it's never good to blindly rely on that!). 
Pete
  Reply
#4
(06-12-2016, 06:00 PM)pfeerick Wrote:
(06-11-2016, 10:55 PM)clackamas Wrote: The main question I have is do I need to add a ploy (or other) fuse (as he describes) to protect from short circuits?
Hi Henry,
Since you're using multiple pine64 boards in an array, I would be tempted to put standard glass fuses inline with the power supply line into each pine64. A polyfuse is good as it self-resets, but that can also hide a problem, unless you know that the device has triggered the fuse and why. Plain glass fuses are cheap, and if you were to put 1.5/2A fuses on each pine64, I don't see why they would blow those fuses unless something went wrong (as I have yet to see a properly working pine64 need more than 800ma @ 5v for just the main board+wifi, without the LCD or peripherals on the USB). 
At an absolute minimum, you would want a single fuse between the power supply and the cluster, rated at just more than what you expect the maximum power from the cluster to be (for 5 pines, a fuse between 7.5A -10A would do), so the power supply doesn't get overloaded (although modern computer power supplies do have good self-protection circuitry in them, and generally shut down if anything goes wrong, but it's never good to blindly rely on that!). 
Pete

Thank you.  That is very helpful.  I am trying to keep the cabling simple so, the glass fuses meet that criteria.  I eventually play to build a 33 node cluster but the 5 boards are to prototype.
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Which Power Supply Unit for Pine64 A64 DB V1.1 2GB REV B (year 2016)? databaseprogrammer 1 3,490 07-03-2021, 01:29 AM
Last Post: tllim
Lightbulb Alternate Power DC-IN on the Euler Bus also with PI filter for batt operation MarkHaysHarris777 13 27,215 12-19-2020, 09:53 PM
Last Post: evilpete
  PineA64 battery in Germany (specifications or alternatives) burningkrome 0 3,330 12-02-2018, 04:10 AM
Last Post: burningkrome
  Once Again: Power Supply problems I guess (Pine A64+ locking up) marcelser 0 3,741 06-04-2018, 03:11 PM
Last Post: marcelser
  Power supply problems. larsen8989 5 10,206 05-03-2018, 09:01 PM
Last Post: tllim
  solar power on a Pine64 tablet Little_Johnny 11 17,509 03-20-2018, 12:01 AM
Last Post: pfeerick
  Power up HDDs c4tich 3 6,902 03-18-2017, 09:18 AM
Last Post: Luke
  Provide power in via Pi-2 header BenCranston 22 32,749 03-08-2017, 10:38 PM
Last Post: pfeerick
  any danger from using 2 power sources at same time? dkryder 3 7,574 01-20-2017, 10:45 PM
Last Post: MarkHaysHarris777
Lightbulb A Tale of Two Power Supplies - why good is good and better is best MarkHaysHarris777 9 19,809 01-07-2017, 11:59 PM
Last Post: aegrotatio

Forum Jump:


Users browsing this thread: 1 Guest(s)